Hi Stephen, On Sat, 09 Mar 2013 23:34:21 -0700, Stephen Warren <swar...@wwwdotorg.org> wrote:
> On 02/03/2013 04:27 AM, Albert ARIBAUD wrote: > > On Tue, 15 Jan 2013 19:26:58 -0700, Stephen Warren <swar...@wwwdotorg.org> > > wrote: > > > >> This adds a simple driver for the BCM2835's SD controller. > >> > >> Workarounds are implemented for: > >> * Register writes can't be too close to each-other in time, or they will > >> be lost. > >> * Register accesses must all be 32-bit, so implement custom accessors. > >> > >> This code was extracted from: > >> git://github.com/gonzoua/u-boot-pi.git master > >> which was created by Oleksandr Tymoshenko. > >> > >> Portions of the code there were obviously based on the Linux kernel at: > >> git://github.com/raspberrypi/linux.git rpi-3.6.y > >> commit f5b930b "Main bcm2708 linux port" signed-off-by Dom Cobley. > >> > >> swarren changed the following for upstream: > >> * Removed hack udelay()s in bcm2835_sdhci_raw_writel(); setting > >> SDHCI_QUIRK_WAIT_SEND_CMD appears to solve the issues. > >> * Remove register logging from read*/write* functions. > >> * Sort out confusion with min/max_freq values passed to add_sdhci(). > >> * Use more descriptive variable names and calculations in IO accessors. > >> * Simplified and commented twoticks_delay calculation. > >> * checkpatch fixes. > >> > >> Cc: Andy Fleming <aflem...@gmail.com> > >> Signed-off-by: Oleksandr Tymoshenko <go...@bluezbox.com> > >> Signed-off-by: Stephen Warren <swar...@wwwdotorg.org> > >> --- > >> Andy, could you please ack this so Albert can take it through the ARM tree; > >> patch 7/7 depends is an ARM patch and depends on this. Thanks. > ... > > Andy, can you give a formal Acked-By to this patch as per Stephen's > > request? > > > > Thanks in advance! > > Albert, it looks like Andy actually did already Ack this, back in > November last year; see: > > http://lists.denx.de/pipermail/u-boot/2012-November/141064.html > > Note that when I reposted V5 in January, I merged the ARM/mailbox/video > patches and MMC series together, hence the different patch numbers. > > Are you OK pulling this series out of patchwork to be applied, or should > I repost? Thanks. I'll apply the series from patchwork to u-boot-arm/master, adding Andy's Ack manually in 6/7. If these apply cleanly, then all right. Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
