Dear Otavio Salvador, > On Thu, Feb 28, 2013 at 7:59 PM, Fabio Estevam <feste...@gmail.com> wrote: > > From: Fabio Estevam <fabio.este...@freescale.com> > > > > Currently the following kernel hang happens when loading a 2.6.35 kernel > > from Freeescale on a mx28evk board: > > > > RPC: Registered tcp transport module. > > RPC: Registered tcp NFSv4.1 backchannel transport module. > > Bus freq driver module loaded > > IMX usb wakeup probe > > usb h1 wakeup device is registered > > mxs_cpu_init: cpufreq init finished > > ... > > > > Loading the same kernel using the bootlets from the > > imx-bootlets-src-10.12.01 package, the hang does not occur. > > > > Comparing the DDR2 initialization from the bootlets code against the > > U-boot one, we can notice some mismatches, and after applying the same > > initialization into U-boot the 2.6.35 kernel can boot normally. > > > > Also tested with 'mtest' command, which runs succesfully. > > > > Signed-off-by: Fabio Estevam <fabio.este...@freescale.com> > > Acked-by: Otavio Salvador <ota...@ossystems.com.br>
Otavio, did you review the changes done in this patch ? Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
