On 01.03.2013 08:12, Jagan Teki wrote: >>> I made a fix for hw cfi issue when device is operating in 8-bit mode, >>> If the above changes are looks fine we may have this fix will solve >>> the M29EW flashes operates under 8-bit mode. >>> >>> Could send your comments/views. >> >> Not sure if I understood you correctly. So I have to ask some questions: >> > > Firstly, apologies from my side by sending too many status updates > that makes you confusion.
No problem. I have been slow on reacting. >> Did you use this patch? > > Yes, I have applied the same patch, > >> >> http://patchwork.ozlabs.org/patch/140863/ >> >> Did it apply without issues to mainline U-Boot? Or did you have to make >> some changes so that it can be applied? And did it fix the issues you >> have seen before? > > I have manually applied those changes as the index values are differ. > I haven't added any newly code other than the patch changes. If you had to make some changes to this patch, then please send the changes / updated patch version as a new version (v3) to the list. So that it applies clean now. And please change the commit text accordingly. > Yes it fixed the error by detecting correct manufacture and device ID. Only that? IIRC, then without this patch, writing to the 8-bit flash didn't work at all. But I don't have such a board, so I can't really test myself. >> And did you have some make some further changes as well? > > And apart from these patch change, I have changed one more this for > numonyx M29EW fix > for incorrect write buffer size..any way that I could send once these > changes are pushed/reviewed. Please send this additional change/fix as a separate patch to the list as well. Thanks, Stefan _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
