From: Harvey Chapman <hchap...@3gfp.com>
Adjust the sizes calculated for whole partition/chip operations by
removing the size of bad blocks so we don't try to erase/read/write
past a partition/chip boundary.
Signed-off-by: Harvey Chapman <hchap...@3gfp.com>
---
common/cmd_nand.c | 51 +++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 51 insertions(+)
diff --git a/common/cmd_nand.c b/common/cmd_nand.c
index 495610c..657ea23 100644
--- a/common/cmd_nand.c
+++ b/common/cmd_nand.c
@@ -428,6 +428,32 @@ static int raw_access(nand_info_t *nand, ulong addr,
loff_t off, ulong count,
return ret;
}
+static int adjust_size_for_badblocks(loff_t *size, loff_t offset, int dev) {
+ /* We grab the nand info object here fresh because this is usually
+ * called after arg_off_size() which can change the value of dev.
+ */
+ nand_info_t *nand = &nand_info[dev];
+ loff_t original_size = *size;
+ loff_t maxoffset = offset + *size;
+ int badblocks = 0;
+
+ /* count badblocks in NAND from offset to offset + size */
+ for (; offset < maxoffset; offset += nand->erasesize)
+ if (nand_block_isbad(nand, offset)) {
+ badblocks++;
+ }
+ /* adjust size if any bad blocks found */
+ if (badblocks) {
+ *size -= badblocks * nand->erasesize;
+ printf("size adjusted to 0x%llx (%d bad blocks)\n",
+ (unsigned long long)*size, badblocks);
+ }
+ /* return size adjusted as a positive value so callers
+ * can use the return code to determine if anything happened
+ */
+ return (original_size - *size);
+}
+
static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
int i, ret = 0;
@@ -524,6 +550,7 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
int scrub = !strncmp(cmd, "scrub", 5);
int spread = 0;
int args = 2;
+ int adjust_size = 0;
const char *scrub_warn =
"Warning: "
"scrub option will erase all factory set bad blocks!\n"
@@ -540,8 +567,10 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
spread = 1;
} else if (!strcmp(&cmd[5], ".part")) {
args = 1;
+ adjust_size = 1;
} else if (!strcmp(&cmd[5], ".chip")) {
args = 0;
+ adjust_size = 1;
} else {
goto usage;
}
@@ -560,6 +589,15 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
if (arg_off_size(argc - o, argv + o, &dev, &off, &size) != 0)
return 1;
+ /* The size for erase.part and erase.chip has been calculated
+ * for us as the remainder of the chip/partition from offset.
+ * Adjust down for bad blocks, if necessary, so we don't
+ * erase past the end of the chip/partition by accident.
+ */
+ if (adjust_size && !scrub) {
+ adjust_size_for_badblocks(&size, off, dev);
+ }
+
nand = &nand_info[dev];
memset(&opts, 0, sizeof(opts));
@@ -644,6 +682,19 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
&off, &size) != 0)
return 1;
+ /* If no size was given, it has been calculated for us
as
+ * the remainder of the chip/partition from offset.
Adjust
+ * down for bad blocks, if necessary, so we don't
+ * read/write past the end of the partition by accident.
+ *
+ * nand read addr part size "size" is arg 5
+ */
+ if (argc < 5) {
+ /* Don't try to use rwsize here, it's not the
+ * right type
+ */
+ adjust_size_for_badblocks(&size, off, dev);
+ }
rwsize = size;
}
--
1.7.10.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
