Fdt entry for Exynos TMU driver specific pre-defined values used for
calibration of current temperature and defining threshold values.
Signed-off-by: Akshay Saraswat <aksha...@samsung.com>
Acked-by: Simon Glass <s...@chromium.org>
---
Changes since v10:
- None.
arch/arm/dts/exynos5250.dtsi | 5 ++++
board/samsung/dts/exynos5250-smdk5250.dts | 12 +++++++++
doc/device-tree-bindings/exynos/tmu.txt | 41 +++++++++++++++++++++++++++++++
include/fdtdec.h | 1 +
lib/fdtdec.c | 1 +
5 files changed, 60 insertions(+)
create mode 100644 doc/device-tree-bindings/exynos/tmu.txt
diff --git a/arch/arm/dts/exynos5250.dtsi b/arch/arm/dts/exynos5250.dtsi
index ed8c8dd..61d35a8 100644
--- a/arch/arm/dts/exynos5250.dtsi
+++ b/arch/arm/dts/exynos5250.dtsi
@@ -151,4 +151,9 @@
};
};
+ tmu@10060000 {
+ compatible = "samsung,exynos-tmu";
+ reg = <0x10060000 0x10000>;
+ };
+
};
diff --git a/board/samsung/dts/exynos5250-smdk5250.dts
b/board/samsung/dts/exynos5250-smdk5250.dts
index cbfab6f..00dac40 100644
--- a/board/samsung/dts/exynos5250-smdk5250.dts
+++ b/board/samsung/dts/exynos5250-smdk5250.dts
@@ -66,4 +66,16 @@
compatible = "maxim,max77686_pmic";
};
};
+
+ tmu@10060000 {
+ samsung,min-temp = <25>;
+ samsung,max-temp = <125>;
+ samsung,start-warning = <95>;
+ samsung,start-tripping = <105>;
+ samsung,efuse-min-value = <40>;
+ samsung,efuse-value = <55>;
+ samsung,efuse-max-value = <100>;
+ samsung,slope = <274761730>;
+ samsung,dc-value = <25>;
+ };
};
diff --git a/doc/device-tree-bindings/exynos/tmu.txt
b/doc/device-tree-bindings/exynos/tmu.txt
new file mode 100644
index 0000000..bb734dc
--- /dev/null
+++ b/doc/device-tree-bindings/exynos/tmu.txt
@@ -0,0 +1,41 @@
+Exynos Thermal management Unit
+
+Required properties:
+
+ - compatible : Should be "samsung,exynos-tmu" for TMU
+ - samsung,min-temp : Minimum temperature value (25 degree celsius)
+ - Current temperature of SoC should be more than this value.
+ - samsung,max-temp : Maximum temperature value (125 degree celsius)
+ - Current temperature of SoC should be less than this value.
+ - samsung,start-warning : Temperature at which TMU starts giving warning
(degree celsius)
+ - samsung,start-tripping : Temperature at which system will trip and shutdown
(degree celsius)
+ - samsung,efuse-min-value : SOC efuse min value (Constant 40)
+ - efuse-value should be more than this value.
+ - samsung,efuse-value : SOC actual efuse value (Literal value)
+ - This is the data trimming info.
+ - This value is used to calculate measuring error.
+ - samsung,efuse-max-value : SoC max efuse value (Constant 100)
+ - efuse-value should be less than this value.
+ - samsung,slope : Default value 274761730 (Constant 0x1060_8802).
+ - This is the default value for TMU_CONTROL register.
+ - It sets the gain of amplifier to the positive-tc generator block.
+ - It selects thermal tripping mode and enables thermal tripping.
+ - samsung,dc-value : Measured data calibration value (Constant 25)
+ - Used for tempearture calculation.
+ - This is 25 because temperature measured is always above 25 degrees.
+
+
+Example:
+
+tmu@10060000 {
+ compatible = "samsung,exynos-tmu"
+ samsung,min-temp = <25>;
+ samsung,max-temp = <125>;
+ samsung,start-warning = <95>;
+ samsung,start-tripping = <105>;
+ samsung,efuse-min-value = <40>;
+ samsung,efuse-value = <55>;
+ samsung,efuse-max-value = <100>;
+ samsung,slope = <274761730>;
+ samsung,dc-value = <25>;
+};
diff --git a/include/fdtdec.h b/include/fdtdec.h
index 77f244f..b9301c8 100644
--- a/include/fdtdec.h
+++ b/include/fdtdec.h
@@ -81,6 +81,7 @@ enum fdt_compat_id {
COMPAT_SAMSUNG_EXYNOS_EHCI, /* Exynos EHCI controller */
COMPAT_SAMSUNG_EXYNOS_USB_PHY, /* Exynos phy controller for usb2.0 */
COMPAT_MAXIM_MAX77686_PMIC, /* MAX77686 PMIC */
+ COMPAT_SAMSUNG_EXYNOS_TMU, /* Exynos TMU */
COMPAT_COUNT,
};
diff --git a/lib/fdtdec.c b/lib/fdtdec.c
index 3ae348d..5c427ff 100644
--- a/lib/fdtdec.c
+++ b/lib/fdtdec.c
@@ -56,6 +56,7 @@ static const char * const compat_names[COMPAT_COUNT] = {
COMPAT(SAMSUNG_EXYNOS_EHCI, "samsung,exynos-ehci"),
COMPAT(SAMSUNG_EXYNOS_USB_PHY, "samsung,exynos-usb-phy"),
COMPAT(MAXIM_MAX77686_PMIC, "maxim,max77686_pmic"),
+ COMPAT(SAMSUNG_EXYNOS_TMU, "samsung,exynos-tmu"),
};
const char *fdtdec_get_compatible(enum fdt_compat_id id)
--
1.8.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
