PAD_TO is not a generic SPL configuration option, so use CONFIG_SPL_MAX_SIZE
instead.
We want to use --pad-to with a size, but this option expects an address, so use
u-boot-spl.bin instead of u-boot-spl as the input file in order to get addresses
starting at 0.
Signed-off-by: Benoît Thébaudeau <benoit.thebaud...@advansee.com>
---
Changes in v7:
- Use u-boot-spl.bin instead of u-boot-spl in order to avoid having to use
--change-addresses.
Changes in v6:
- Fix size passed to --pad-to thanks to --change-addresses.
Changes in v5: None
Changes in v4:
- New patch.
Changes in v3: None
Changes in v2: None
Makefile | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/Makefile b/Makefile
index a8c7b7b..317dffc 100644
--- a/Makefile
+++ b/Makefile
@@ -486,7 +486,8 @@ $(obj)u-boot.dis: $(obj)u-boot
$(OBJDUMP) -d $< > $@
$(obj)u-boot-with-spl.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
- $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary
$(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin
+ $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SPL_MAX_SIZE) \
+ -I binary -O binary $< $(obj)spl/u-boot-spl-pad.bin
cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $@
rm $(obj)spl/u-boot-spl-pad.bin
--
1.7.10.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
