On Wed, Feb 13, 2013 at 09:44:01AM -0500, Matt Porter wrote: > Add TI814X EVM board directory and config file. > > Signed-off-by: Matt Porter <mpor...@ti.com> [snip] > +++ b/board/ti/ti814x/evm.h > @@ -0,0 +1,7 @@ > +#ifndef _EVM_H [snip] > +++ b/include/configs/ti814x_evm.h > @@ -0,0 +1,213 @@ > +#define __CONFIG_TI814X_EVM_H
Needs GPLv2 or later boilerplate.
[snip]
> +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
> +#define CONFIG_SETUP_MEMORY_TAGS 1
> +#define CONFIG_INITRD_TAG 1 /* for ramdisk support */
Just #define CONFIG_FOO in these cases (and some others that follow)
[snip]
> + "findfdt="\
> + "if test $board_name = A335BONE; then " \
> + "setenv fdtfile am335x-bone.dtb; fi; " \
> + "if test $board_name = A33515BB; then " \
> + "setenv fdtfile am335x-evm.dtb; fi; " \
> + "if test $board_name = A335X_SK; then " \
> + "setenv fdtfile am335x-evmsk.dtb; fi\0" \
That's not right :)
[snip]
> +/* memtest works on 8 MB in DRAM offset 32MB from start of ram disk*/
> +#define CONFIG_SYS_MEMTEST_START (PHYS_DRAM_1 + (64 * 1024 * 1024))
> +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START \
> + + (8 * 1024 * 1024))
This isn't your mistake initially, but this should just be start of
memory to smallest possible config the evm can come with - 4MB.
[snip]
> +#undef CONFIG_NAND_OMAP_GPMC
Just leave it out.
> +#define CONFIG_SYS_BAUDRATE_TABLE { 110, 300, 600, 1200, 2400, \
> +4800, 9600, 14400, 19200, 28800, 38400, 56000, 57600, 115200 }
Leave that out and get the generic table. am335x needs to be updated
for that.
[snip]
> +/* Since SPL did pll and ddr initialization for us,
> + * we don't need to do it twice.
> + */
/*
* Must be like
* this.
*/
--
Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
