PAD_TO is not a generic SPL configuration option, so use CONFIG_SPL_MAX_SIZE instead.
We want to use --pad-to with a size, but this option expects an address, so make addresses start at 0 with --change-addresses. This does not affect the binary image. Signed-off-by: Benoît Thébaudeau <benoit.thebaud...@advansee.com> --- Changes in v6: - Fix size passed to --pad-to thanks to --change-addresses. Changes in v5: None Changes in v4: - New patch. Changes in v3: None Changes in v2: None Makefile | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/Makefile b/Makefile index a8c7b7b..b277be8 100644 --- a/Makefile +++ b/Makefile @@ -486,7 +486,9 @@ $(obj)u-boot.dis: $(obj)u-boot $(OBJDUMP) -d $< > $@ $(obj)u-boot-with-spl.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin - $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin + $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SPL_MAX_SIZE) \ + --change-addresses=-$(CONFIG_SPL_TEXT_BASE) -O binary \ + $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $@ rm $(obj)spl/u-boot-spl-pad.bin -- 1.7.10.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot