Dear Rajeshwari,

On 23/01/13 19:07, Rajeshwari Shinde wrote:
> This patch adds a function to set ps_hold data driving value high.
> This enables the machine to stay powered on after the initial
> power-on condition goes away(e.g. power button).
> 
> Acked-by: Simon Glass <s...@chromium.org>
> Signed-off-by: Rajeshwari Shinde <rajeshwar...@samsung.com>
> ---
> Changes in V2:
>       - Corrected the multi line comment style
>  arch/arm/cpu/armv7/exynos/power.c        |   10 ++++++++++
>  arch/arm/include/asm/arch-exynos/power.h |    9 +++++++++
>  2 files changed, 19 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/cpu/armv7/exynos/power.c 
> b/arch/arm/cpu/armv7/exynos/power.c
> index d4bce6d..8572cfd 100644
> --- a/arch/arm/cpu/armv7/exynos/power.c
> +++ b/arch/arm/cpu/armv7/exynos/power.c
> @@ -95,3 +95,13 @@ void set_dp_phy_ctrl(unsigned int enable)
>       if (cpu_is_exynos5())
>               exynos5_dp_phy_control(enable);
>  }
> +
> +void power_ps_hold_setup(void)

Could you please modify function's name as other functions?
(e.g: set_*)

> +{
> +     struct exynos5_power *power =
> +             (struct exynos5_power *)samsung_get_base_power();
> +
> +     /* Set PS-Hold high */
> +     setbits_le32(&power->ps_hold_control,
> +                     EXYNOS_PS_HOLD_CONTROL_DATA_HIGH);
> +}

This function should support exynos4 also.
Please refer other functions.
 
> diff --git a/arch/arm/include/asm/arch-exynos/power.h 
> b/arch/arm/include/asm/arch-exynos/power.h
> index d2fdb59..8384cbb 100644
> --- a/arch/arm/include/asm/arch-exynos/power.h
> +++ b/arch/arm/include/asm/arch-exynos/power.h
> @@ -864,4 +864,13 @@ void set_dp_phy_ctrl(unsigned int enable);
>  
>  #define EXYNOS_DP_PHY_ENABLE         (1 << 0)
>  
> +#define EXYNOS_PS_HOLD_CONTROL_DATA_HIGH     (1 << 8)
> +
> +/*
> + * Set ps_hold data driving value high
> + * This enables the machine to stay powered on
> + * after the initial power-on condition goes away
> + * (e.g. power button).
> + */
> +void power_ps_hold_setup(void);
>  #endif
> 

Thanks.
Minkyu Kang.

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to