Stephen,
On Tue, Feb 12, 2013 at 1:29 PM, Stephen Warren <swar...@wwwdotorg.org> wrote:
> On 02/11/2013 10:17 AM, Tom Warren wrote:
>> Linux dts files were used for those boards that didn't already
>> have sdhci info populated. Tamonten has their own dtsi file with
>> common sdhci nodes (sourced from Linux).
>
>> diff --git a/board/nvidia/dts/tegra20-seaboard.dts
>> b/board/nvidia/dts/tegra20-seaboard.dts
>
>> sdhci@c8000400 {
>> + status = "okay";
>> cd-gpios = <&gpio 69 0>; /* gpio PI5 */
>> wp-gpios = <&gpio 57 0>; /* gpio PH1 */
>> - power-gpios = <&gpio 70 0>; /* gpio PI6 */
>> + power-gpios = <&gpio 70 3>; /* gpio PI6 */
>> + bus-width = <4>;
>> };
>
> The "3" for the power-gpios flags looks odd, and doesn't match the
> kernel. The binding only defines bit 0 for inverted, and doesn't define
> bit 1.
That came from our internal U-Boot repo - don't know why it's setting
it as an output and asserted and no other Seaboard DT file does. I'll
look into it.
Thanks
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
