Hi, On Fri, Feb 8, 2013 at 9:25 AM, Tom Warren <twarren.nvi...@gmail.com> wrote: > Update DT tables and enable I2C driver support for the > Tegra114 Dalmore board. This uses the standard Tegra I2C driver. > 5 controllers are supported, although all may not have devices > behind them on every board. > > Changes in V2: > - use new calculation for T114 I2C clocks > - incorporate review comments from StephenW for the dtsi file > Changes in V3: > - Added tegra114-i2c name to compat_names/compat_id table(s) > - Add search for T114 I2C node in i2c_init_board > - Added is_scs flag to i2c_bus struct (single clock source HW) > - Use is_scs flag to trigger new clock source rate calculation > - Moved aliases to dtsi file as per StephenW > - Removed tegra30-car & tegra20-i2c compatible strings > - Changed I2C5 (PWR_I2C) clock to 400MHz > > Tom Warren (3): > Tegra: I2C: Add T114 clock support to tegra_i2c driver > Tegra114: fdt: Update DT files with I2C info for T114/Dalmore > Tegra114: I2C: Enable I2C driver on Dalmore E1611 eval board > > arch/arm/dts/tegra114.dtsi | 64 > +++++++++++++++++++++++++++ > arch/arm/include/asm/arch-tegra/tegra_i2c.h | 6 +++ > board/nvidia/dts/tegra114-dalmore.dts | 28 ++++++++++++ > drivers/i2c/tegra_i2c.c | 42 +++++++++++++++-- > include/configs/dalmore.h | 9 ++++ > include/configs/tegra114-common.h | 3 + > include/fdtdec.h | 1 + > lib/fdtdec.c | 1 + > 8 files changed, 149 insertions(+), 5 deletions(-) >
Series LGTM except for the comment about the need to enhance the alias function. Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot