On Mon, Feb 11, 2013 at 04:29:03PM +0000, Mark Jackson wrote: > Expose the enable_gpmc_cs_config() function so OMAP2 boards can register > GPMC chipselects. > > Signed-off-by: Mark Jackson <m...@newflow.co.uk> > --- > arch/arm/include/asm/arch-am33xx/sys_proto.h | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h > b/arch/arm/include/asm/arch-am33xx/sys_proto.h > index 588d8de..97ab60d 100644 > --- a/arch/arm/include/asm/arch-am33xx/sys_proto.h > +++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h > @@ -35,5 +35,7 @@ void ddr_pll_config(unsigned int ddrpll_M); > void sdelay(unsigned long); > void gpmc_init(void); > +void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 > base, > + u32 size); > void omap_nand_switch_ecc(int); > #endif
Can you please correct the description? You're exposing the function for am33xx not omap2. Otherwise fine with me, and I assume you need this on a custom board (aside: the function already exists/is used in arch/arm/cpu/armv7/am33xx/mem.c). Are you planning to submit that support as well? Thanks! -- Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
