Link symbols as created by the link script can either be absolute or
relative to the text start. This option switches between the two options
so that we can support both.
As we convert architectures over to generic board, we can see if this
option is actually needed, or whether it is possible to unify this feature
also.
Signed-off-by: Simon Glass <s...@chromium.org>
---
Changes in v5:
- Add offsets support for access to fdt that uses CONFIG_OF_SEPARATE
Changes in v4: None
Changes in v3: None
Changes in v2: None
README | 6 ++++++
common/board_f.c | 15 +++++++++++++++
2 files changed, 21 insertions(+)
diff --git a/README b/README
index 88526cb..f897c4d 100644
--- a/README
+++ b/README
@@ -3219,6 +3219,12 @@ Configuration Settings:
its config.mk file). If you find problems enabling this option on
your board please report the problem and send patches!
+- CONFIG_SYS_SYM_OFFSETS
+ This is set by architectures that use offsets for link symbols
+ instead of absolute values. So bss_start is obtained using an
+ offset _bss_start_ofs from CONFIG_SYS_TEXT_BASE, rather than
+ directly. You should not need to touch this setting.
+
The following definitions that deal with the placement and management
of environment data (variable area); in general, we support the
diff --git a/common/board_f.c b/common/board_f.c
index 3a8036f..db3ef0a 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -107,8 +107,13 @@ static int display_text_info(void)
{
ulong bss_start, bss_end;
+#ifdef CONFIG_SYS_SYM_OFFSETS
bss_start = _bss_start_ofs + _TEXT_BASE;
bss_end = _bss_end_ofs + _TEXT_BASE;
+#else
+ bss_start = (ulong)&__bss_start;
+ bss_end = (ulong)&__bss_end;
+#endif
debug("U-Boot code: %08X -> %08lX BSS: -> %08lX\n",
CONFIG_SYS_TEXT_BASE, bss_start, bss_end);
@@ -174,7 +179,11 @@ static int zero_global_data(void)
static int setup_mon_len(void)
{
+#ifdef CONFIG_SYS_SYM_OFFSETS
gd->mon_len = _bss_end_ofs;
+#else
+ gd->mon_len = (ulong)&__bss_end - (ulong)&__text_start;
+#endif
return 0;
}
@@ -190,7 +199,11 @@ static int setup_fdt(void)
gd->fdt_blob = _binary_dt_dtb_start;
#elif defined CONFIG_OF_SEPARATE
/* FDT is at end of image */
+# ifdef CONFIG_SYS_SYM_OFFSETS
gd->fdt_blob = (void *)(_end_ofs + CONFIG_SYS_TEXT_BASE);
+# else
+ gd->fdt_blob = (ulong *)&_end;
+# endif
#endif
/* Allow the early environment to override the fdt address */
gd->fdt_blob = (void *)getenv_ulong("fdtcontroladdr", 16,
@@ -476,6 +489,7 @@ static int mark_bootstage(void)
}
static init_fnc_t init_sequence_f[] = {
+ zero_global_data,
setup_fdt,
setup_mon_len,
arch_cpu_init, /* basic arch cpu dependent setup */
@@ -510,6 +524,7 @@ static init_fnc_t init_sequence_f[] = {
#ifdef CONFIG_POST
init_post,
#endif
+ setup_dram_config,
/*
* Now that we have DRAM mapped and working, we can
* relocate the code and continue running from DRAM.
--
1.8.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
