Hi Albert,
please pull these three patches to your arm custodian tree.
All of them are related to xilinx zynq.
Also after my discussion with Wolfgang Denk I have enabled DCC for zynq
because we are using it in one configuration and this driver
is not compiled by any platform.
Thanks,
Michal
The following changes since commit d62ef5619c9249772247d6af3b8e65207ae0c871:
Jagannadha Sutradharudu Teki (1):
sf: stmicro: Add support for N25Q256A
are available in the git repository at:
git://www.denx.de/git/u-boot-microblaze.git mainline/arm
Michal Simek (3):
xilinx: zynq: Enable DCC and create new zynq_dcc board
arm: zynq: Add SLCR support with system reset
arm: zynq: Add lowlevel initialization to C
arch/arm/cpu/armv7/zynq/Makefile | 1 +
arch/arm/cpu/armv7/zynq/cpu.c | 28 +++++++++-
arch/arm/cpu/armv7/zynq/slcr.c | 63 ++++++++++++++++++++
arch/arm/include/asm/arch-zynq/hardware.h | 85 ++++++++++++++++++++++++++++
arch/arm/include/asm/arch-zynq/sys_proto.h | 30 ++++++++++
boards.cfg | 1 +
include/configs/zynq.h | 5 ++
7 files changed, 212 insertions(+), 1 deletions(-)
create mode 100644 arch/arm/cpu/armv7/zynq/slcr.c
create mode 100644 arch/arm/include/asm/arch-zynq/hardware.h
create mode 100644 arch/arm/include/asm/arch-zynq/sys_proto.h
--
Michal Simek, Ing. (M.Eng)
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/
Microblaze U-BOOT custodian
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
