Hi Marek, On Tuesday, January 8, 2013 12:18:05 PM, Benoît Thébaudeau wrote: > Dear Marek Vasut, > > On Tuesday, January 8, 2013 12:05:26 PM, Marek Vasut wrote: > > Dear Benoît Thébaudeau, > > > > [...] > > > > > > > > NOTE: I'm seeing issues when this is compiled into U-Boot. > > > > > > U-Boot > > > > > > won't boot on > > > > > > my MX53 board and will hang right after printing "DRAM:" and > > > > > > before > > > > > > printing the > > > > > > CPU info. I suspect it's some kind of unaligned access. > > > > > > > > > > OK. I'm waiting for your test results. It works for me on > > > > > i.MX51 > > > > > with > > > > > 2012.07. > > > > > > > > It works with 2013.01-rc1, but I have issues. When I boot the > > > > board > > > > from SD, it > > > > hangs. When I load via JTAG, it doesn't hang. I suspect it's > > > > something related > > > > to the MXC NAND driver, since if the driver is not compiled in, > > > > it > > > > works like > > > > charm both ways. > > > > > > > > Otherwise, when booted, the NAND works fine. > > > > > > > > I wonder if there's some unaligned access or something happening > > > > in > > > > the NAND > > > > driver. Or maybe some other issue where the code is miscompiled. > > > > > > Or there is something wrong with the Flash header or SPL? > > > > Flash header? > > The IVT from imximage stuff.
Did you have a chance to further investigate this hang issue with non-JTAG boot and the NFC driver compiled in? Best regards, Benoît _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
