On Fri, Jan 18, 2013 at 7:42 PM, Scott Wood <scottw...@freescale.com> wrote:
> This saved 640 bytes on MPC8536DS (a board with two of the six
> ports defined).
>
> Signed-off-by: Scott Wood <scottw...@freescale.com>
I noticed the same issue on SPL builds.
Ack.
-M
> ---
> drivers/serial/serial_ns16550.c | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/drivers/serial/serial_ns16550.c b/drivers/serial/serial_ns16550.c
> index fc01a3c..b92eef4 100644
> --- a/drivers/serial/serial_ns16550.c
> +++ b/drivers/serial/serial_ns16550.c
> @@ -247,24 +247,36 @@ serial_setbrg_dev(unsigned int dev_index)
> _serial_setbrg(dev_index);
> }
>
> +#if defined(CONFIG_SYS_NS16550_COM1)
> DECLARE_ESERIAL_FUNCTIONS(1);
> struct serial_device eserial1_device =
> INIT_ESERIAL_STRUCTURE(1, "eserial0");
> +#endif
> +#if defined(CONFIG_SYS_NS16550_COM2)
> DECLARE_ESERIAL_FUNCTIONS(2);
> struct serial_device eserial2_device =
> INIT_ESERIAL_STRUCTURE(2, "eserial1");
> +#endif
> +#if defined(CONFIG_SYS_NS16550_COM3)
> DECLARE_ESERIAL_FUNCTIONS(3);
> struct serial_device eserial3_device =
> INIT_ESERIAL_STRUCTURE(3, "eserial2");
> +#endif
> +#if defined(CONFIG_SYS_NS16550_COM4)
> DECLARE_ESERIAL_FUNCTIONS(4);
> struct serial_device eserial4_device =
> INIT_ESERIAL_STRUCTURE(4, "eserial3");
> +#endif
> +#if defined(CONFIG_SYS_NS16550_COM5)
> DECLARE_ESERIAL_FUNCTIONS(5);
> struct serial_device eserial5_device =
> INIT_ESERIAL_STRUCTURE(5, "eserial4");
> +#endif
> +#if defined(CONFIG_SYS_NS16550_COM6)
> DECLARE_ESERIAL_FUNCTIONS(6);
> struct serial_device eserial6_device =
> INIT_ESERIAL_STRUCTURE(6, "eserial5");
> +#endif
>
> __weak struct serial_device *default_serial_console(void)
> {
> --
> 1.7.9.5
>
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
