On Wed, Jan 30, 2013 at 12:12 PM, Marek Vasut <ma...@denx.de> wrote:
> Dear Otavio Salvador,
>
>> Adjust HW_DRAM_CTL14 to enable the chip selects to allow usage of full
>> 128MB of RAM.
>>
>> Signed-off-by: Otavio Salvador <ota...@ossystems.com.br>
>
> Just enable the full set for all in the generic memory register set
> (dram_vals)?
Per datasheet description it shouldn't be done for LQFP; so the safest
setting is to the default we're using as it will work for new boards
and the chip select can be adjusted when need.
>> ---
>> board/freescale/mx23evk/spl_boot.c | 10 ++++++++++
>> 1 file changed, 10 insertions(+)
>>
>> diff --git a/board/freescale/mx23evk/spl_boot.c
>> b/board/freescale/mx23evk/spl_boot.c index 6007433..b6f4e7e 100644
>> --- a/board/freescale/mx23evk/spl_boot.c
>> +++ b/board/freescale/mx23evk/spl_boot.c
>> @@ -98,6 +98,16 @@ const iomux_cfg_t iomux_setup[] = {
>> (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
>> };
>>
>> +#define HW_DRAM_CTL14 (0x38 >> 2)
>> +#define CS_MAP 0x3
>> +#define INTAREF 0x2
>> +#define HW_DRAM_CTL14_CONFIG (INTAREF << 8 | CS_MAP)
>> +
>> +void mxs_adjust_memory_params(uint32_t *dram_vals)
>> +{
>> + dram_vals[HW_DRAM_CTL14] = HW_DRAM_CTL14_CONFIG;
>> +}
>> +
>> void board_init_ll(void)
>> {
>> mxs_common_spl_init(iomux_setup, ARRAY_SIZE(iomux_setup));
>
> Best regards,
> Marek Vasut
--
Otavio Salvador O.S. Systems
E-mail: ota...@ossystems.com.br http://www.ossystems.com.br
Mobile: +55 53 9981-7854 http://projetos.ossystems.com.br
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
