On Thu, Jan 24, 2013 at 10:43 PM, Rajeshwari Shinde
<rajeshwar...@samsung.com> wrote:
> This patch adds funtion to enable XXTI clock source
> required by MAX98095 codec.
>
> Signed-off-by: Rajeshwari Shinde <rajeshwar...@samsung.com>
Acked-by: Simon Glass <s...@chromium.org>
> ---
> Changes in V2:
> - Corrected multi-line comment style
> arch/arm/cpu/armv7/exynos/power.c | 11 +++++++++++
> arch/arm/include/asm/arch-exynos/power.h | 11 +++++++++++
> 2 files changed, 22 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/cpu/armv7/exynos/power.c
> b/arch/arm/cpu/armv7/exynos/power.c
> index 8572cfd..8de30c1 100644
> --- a/arch/arm/cpu/armv7/exynos/power.c
> +++ b/arch/arm/cpu/armv7/exynos/power.c
> @@ -105,3 +105,14 @@ void power_ps_hold_setup(void)
> setbits_le32(&power->ps_hold_control,
> EXYNOS_PS_HOLD_CONTROL_DATA_HIGH);
> }
> +
> +
> +void power_enable_xclkout(void)
> +{
> + struct exynos5_power *power =
> + (struct exynos5_power *)samsung_get_base_power();
> +
> + /* use xxti for xclk out */
> + clrsetbits_le32(&power->pmu_debug, PMU_DEBUG_CLKOUT_SEL_MASK,
> + PMU_DEBUG_XXTI);
> +}
> diff --git a/arch/arm/include/asm/arch-exynos/power.h
> b/arch/arm/include/asm/arch-exynos/power.h
> index 85e2cd9..09343d7 100644
> --- a/arch/arm/include/asm/arch-exynos/power.h
> +++ b/arch/arm/include/asm/arch-exynos/power.h
> @@ -872,4 +872,15 @@ void set_dp_phy_ctrl(unsigned int enable);
> * (e.g. power button).
> */
> void power_ps_hold_setup(void);
> +
> +/* PMU_DEBUG bits [12:8] = 0x1000 selects XXTI clock source */
> +#define PMU_DEBUG_XXTI 0x1000
> +/* Mask bit[12:8] for xxti clock selection */
> +#define PMU_DEBUG_CLKOUT_SEL_MASK 0x1f00
> +
> +/*
> + * Pmu debug is used for xclkout, enable xclkout with
> + * source as XXTI
> + */
> +void power_enable_xclkout(void);
> #endif
> --
> 1.7.4.4
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
