OK, no problem.
Eventually I'll get it right :-)
3rd (and hopefully final) attempt:
This patch makes sure the correct mask is applied when setting
the encryption and I2C bus 0 clock in SCCR.
Failing to do so may lead to ENCCM being 0 in which case I2C bus 0
won't function.
diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c
index 491c2e5..8e9c875 100644
--- a/cpu/mpc83xx/cpu_init.c
+++ b/cpu/mpc83xx/cpu_init.c
@@ -106,7 +106,7 @@ void cpu_init_f (volatile immap_t * im)
#ifdef CONFIG_SYS_SCCR_ENCCM
/* Encryption clock mode */
im->clk.sccr = (im->clk.sccr & ~SCCR_ENCCM) |
- (CONFIG_SYS_SCCR_ENCCM << SCCR_PCICM_SHIFT);
+ (CONFIG_SYS_SCCR_ENCCM << SCCR_ENCCM_SHIFT);
#endif
#ifdef CONFIG_SYS_SCCR_PCICM
--
1.5.2.2
Signed-off-by: Norbert van Bolhuis <nvbolh...@aimvalley.nl>
Wolfgang Denk wrote:
> Dear Norbert van Bolhuis,
>
> In message <49b8b26b.4090...@aimvalley.nl> you wrote:
>> Yes I just cut-n-pasted it.
>> I hope it's better now.
>
> No, it is not better.
>
> Patches should be sent inline, and not as attachments. It would be
> best if you used git-send-email to post the patch.
>
> Also, your Signed-off-by: line is missing in the patch.
>
> And it would be better if you used git-format-patch to create the
> patch.
>
>
> Sorry for the trouble for a one-line-fix, but I think it is important
> to learn these things right in the beginning - the less efforts will
> be there when it comes to real work.
>
> Best regards,
>
> Wolfgang Denk
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
