From: Knut Wohlrab <knut.wohl...@de.bosch.com> The USB host interface is routed to plug USB1/J30 on the mother board.
Signed-off-by: Knut Wohlrab <knut.wohl...@de.bosch.com> --- Changes in v2: - Don't add an empty board_ehci_hcd_init() to mx6qsabreauto.c. It's not needed because board_ehci_hcd_init() is declared as weak. include/configs/mx6qsabreauto.h | 11 +++++++++++ 1 files changed, 11 insertions(+), 0 deletions(-) diff --git a/include/configs/mx6qsabreauto.h b/include/configs/mx6qsabreauto.h index f4a082a..f2ff3e1 100644 --- a/include/configs/mx6qsabreauto.h +++ b/include/configs/mx6qsabreauto.h @@ -19,6 +19,17 @@ #define CONFIG_MMCROOT "/dev/mmcblk0p2" #define PHYS_SDRAM_SIZE (2u * 1024 * 1024 * 1024) +/* USB Configs */ +#define CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MX6 +#define CONFIG_USB_STORAGE +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_MXC_USB_PORT 1 +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 + #include "mx6qsabre_common.h" #define CONFIG_SYS_FSL_USDHC_NUM 2 -- 1.7.0.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
