On 16/01/2013 11:49, Sarvesh Gupta wrote: > > Dear All, > > I have added the USB host controller driver into our Mx53 loco board's u-boot > and also made some changes in mx53_loco.h and mx53_loco.c. > > Below is the complete log what I am getting on serial console: > > > > U-Boot 2009.08-dirty (Jan 15 2013 - 12:32:20) > CPU: Freescale i.MX53 family 2.1V at 800 MHz > mx53 pll1: 800MHz > mx53 pll2: 400MHz > mx53 pll3: 216MHz > mx53 pll4: 455MHz
This ML is intended for U-Boot mainline. However, you are using a version provided and modified by the manufacturer. Ask your support for this, or use u-boot mainline (v2013.01) to post your questions on this mailing list. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] ===================================================================== _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
