This board is from a u-boot point of view a mixture between kmnusa and a standard km_kirkwood board. We have our u-boot environment in the spi NOR flash, but we have a direct connection between the kirkwood and the piggy. A FPGA is connected via the PCIe interface. So we only have to select the specific features in the board setup.
Signed-off-by: Holger Brunck <[email protected]> cc: Valentin Longchamp <[email protected]> cc: Prafulla Wadaskar <[email protected]> --- boards.cfg | 1 + include/configs/km_kirkwood.h | 8 ++++++++ 2 files changed, 9 insertions(+), 0 deletions(-) diff --git a/boards.cfg b/boards.cfg index e4b0d44..19c36a3 100644 --- a/boards.cfg +++ b/boards.cfg @@ -162,6 +162,7 @@ lsxhl arm arm926ejs lsxl buffalo km_kirkwood arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_KIRKWOOD km_kirkwood_pci arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_KIRKWOOD_PCI kmnusa arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_NUSA +kmsuv31 arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_SUV31 mgcoge3un arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_MGCOGE3UN kmcoge5un arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_COGE5UN portl2 arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_PORTL2 diff --git a/include/configs/km_kirkwood.h b/include/configs/km_kirkwood.h index 762cc10..83bb7aa 100644 --- a/include/configs/km_kirkwood.h +++ b/include/configs/km_kirkwood.h @@ -98,6 +98,14 @@ #define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/ #define CONFIG_KM_PIGGY4_88E6061 +/* KM_SUV31 */ +#elif defined(CONFIG_KM_SUV31) +#define KM_IVM_BUS "pca9547:70:9" /* I2C2 (Mux-Port 1)*/ +#define CONFIG_IDENT_STRING "\nKeymile SUV31" +#define CONFIG_HOSTNAME kmsuv31 +#define CONFIG_KM_ENV_IS_IN_SPI_NOR +#define CONFIG_KM_FPGA_CONFIG + #else #error ("Board unsupported") #endif -- 1.7.1 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
