This patch adds a function to set ps_hold data driving value high.
This enables the machine to stay powered on after the initial
power-on condition goes away(e.g. power button).
Signed-off-by: Rajeshwari Shinde <rajeshwar...@samsung.com>
---
arch/arm/cpu/armv7/exynos/power.c | 10 ++++++++++
arch/arm/include/asm/arch-exynos/power.h | 8 ++++++++
2 files changed, 18 insertions(+), 0 deletions(-)
diff --git a/arch/arm/cpu/armv7/exynos/power.c
b/arch/arm/cpu/armv7/exynos/power.c
index d4bce6d..8572cfd 100644
--- a/arch/arm/cpu/armv7/exynos/power.c
+++ b/arch/arm/cpu/armv7/exynos/power.c
@@ -95,3 +95,13 @@ void set_dp_phy_ctrl(unsigned int enable)
if (cpu_is_exynos5())
exynos5_dp_phy_control(enable);
}
+
+void power_ps_hold_setup(void)
+{
+ struct exynos5_power *power =
+ (struct exynos5_power *)samsung_get_base_power();
+
+ /* Set PS-Hold high */
+ setbits_le32(&power->ps_hold_control,
+ EXYNOS_PS_HOLD_CONTROL_DATA_HIGH);
+}
diff --git a/arch/arm/include/asm/arch-exynos/power.h
b/arch/arm/include/asm/arch-exynos/power.h
index d2fdb59..85e2cd9 100644
--- a/arch/arm/include/asm/arch-exynos/power.h
+++ b/arch/arm/include/asm/arch-exynos/power.h
@@ -864,4 +864,12 @@ void set_dp_phy_ctrl(unsigned int enable);
#define EXYNOS_DP_PHY_ENABLE (1 << 0)
+#define EXYNOS_PS_HOLD_CONTROL_DATA_HIGH (1 << 8)
+
+/*Set ps_hold data driving value high
+ * This enables the machine to stay powered on
+ * after the initial power-on condition goes away
+ * (e.g. power button).
+ */
+void power_ps_hold_setup(void);
#endif
--
1.7.4.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
