On 01/11/2013 12:26 AM, Simon Glass wrote:
> Hi Amar,
>
> On Fri, Jan 4, 2013 at 1:34 AM, Amar <amarendra...@samsung.com> wrote:
>> This patch enumerates dwmci and set auto stop command during
>> dwmci initialisation.
>> EMMC read/write is not happening in current implementation
>> due to improper fifo size computation. Hence Modified the fifo size
>> computation to resolve EMMC read write issues.
>>
>> Changes from V1:
>> 1)Created the macros RX_WMARK_SHIFT and RX_WMARK_MASK in header file.
>>
>> Changes from V2:
>> 1)Updation of commit message and resubmition of proper patch set.
>>
>> Changes from V3:
>> 1)Updated to use the macro DWMCI_CTRL_SEND_AS_CCSD instead of
>> the hard coded value (1 << 10).
>
> I suggest you take a look at patman which might simplify your patch
> sending and change logs - see tools/patman/README for details.
>
>>
>> Signed-off-by: Amar <amarendra...@samsung.com>
>> ---
>> drivers/mmc/dw_mmc.c | 14 ++++++++++++--
>> 1 file changed, 12 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c
>> index 4070d4e..776fdb6 100644
>> --- a/drivers/mmc/dw_mmc.c
>> +++ b/drivers/mmc/dw_mmc.c
>> @@ -136,6 +136,7 @@ static int dwmci_send_cmd(struct mmc *mmc, struct
>> mmc_cmd *cmd,
>> return TIMEOUT;
>> }
>> timeout--;
>> + mdelay(1);
>
> How long will this delay in total?
i didn't sure why add the mdelay(1)..i think mdelay(1) is too long.
Isn't there other approach to resolve read/write issue?
Best Regards,
Jaehoon Chung
>
>> }
>>
>> dwmci_writel(host, DWMCI_RINTSTS, DWMCI_INTMSK_ALL);
>> @@ -314,7 +315,7 @@ static void dwmci_set_ios(struct mmc *mmc)
>> static int dwmci_init(struct mmc *mmc)
>> {
>> struct dwmci_host *host = (struct dwmci_host *)mmc->priv;
>> - u32 fifo_size, fifoth_val;
>> + u32 fifo_size, fifoth_val, ier;
>>
>> dwmci_writel(host, DWMCI_PWREN, 1);
>>
>> @@ -323,6 +324,14 @@ static int dwmci_init(struct mmc *mmc)
>> return -1;
>> }
>>
>> + /* Enumerate at 400KHz */
>> + dwmci_setup_bus(host, mmc->f_min);
>> +
>> + /* Set auto stop command */
>> + ier = dwmci_readl(host, DWMCI_CTRL);
>> + ier |= DWMCI_CTRL_SEND_AS_CCSD;
>> + dwmci_writel(host, DWMCI_CTRL, ier);
>> +
>> dwmci_writel(host, DWMCI_RINTSTS, 0xFFFFFFFF);
>> dwmci_writel(host, DWMCI_INTMASK, 0);
>>
>> @@ -332,10 +341,11 @@ static int dwmci_init(struct mmc *mmc)
>> dwmci_writel(host, DWMCI_BMOD, 1);
>>
>> fifo_size = dwmci_readl(host, DWMCI_FIFOTH);
>> + fifo_size = ((fifo_size & RX_WMARK_MASK) >> RX_WMARK_SHIFT) + 1;
>> if (host->fifoth_val)
>> fifoth_val = host->fifoth_val;
>> else
>> - fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size/2 -1) |
>> + fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size/2 - 1) |
>> TX_WMARK(fifo_size/2);
>
> {} around this else I think. Also space around /
>
>> dwmci_writel(host, DWMCI_FIFOTH, fifoth_val);
>>
>> --
>> 1.8.0
>>
>
> Regards,
> Simon
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
