Hi Vivek,
On Thu, Jan 10, 2013 at 10:16 AM, Simon Glass <s...@chromium.org> wrote:
> On Mon, Jan 7, 2013 at 10:30 PM, Vivek Gautam <gautam.vi...@samsung.com>
> wrote:
>> This patch enables Vbus required for USB 2.0 controller.
>>
>> Signed-off-by: Vivek Gautam <gautam.vi...@samsung.com>
>> Signed-off-by: Rajeshwari Shinde <rajeshwar...@samsung.com>
>
> Acked-by: Simon Glass <s...@chromium.org>
Sorry, I can't resist one little comment - I wonder if this USB init
can be delayed until USB is actually used? Perhaps we need such an API
call in the USB subsystem?
Regards,
Simon
>
>> ---
>>
>> Changes from v2:
>> - Rebased on top of u-boot-usb/next
>> - Enclosed the function definition for board_usb_vbus_init()
>> inside "CONFIG_USB_EHCI_EXYNOS"
>>
>> Changes from v1:
>> - Using the old school method of setting up gpio instead
>> of using the pinmux method, since the required gpio line
>> here is board specific.
>>
>> board/samsung/smdk5250/smdk5250.c | 19 +++++++++++++++++++
>> 1 files changed, 19 insertions(+), 0 deletions(-)
>>
>> diff --git a/board/samsung/smdk5250/smdk5250.c
>> b/board/samsung/smdk5250/smdk5250.c
>> index a5816e4..cf7f801 100644
>> --- a/board/samsung/smdk5250/smdk5250.c
>> +++ b/board/samsung/smdk5250/smdk5250.c
>> @@ -60,9 +60,28 @@ static int smc9115_pre_init(void)
>> }
>> #endif
>>
>> +#ifdef CONFIG_USB_EHCI_EXYNOS
>> +int board_usb_vbus_init(void)
>> +{
>> + struct exynos5_gpio_part1 *gpio1 = (struct exynos5_gpio_part1 *)
>> +
>> samsung_get_base_gpio_part1();
>> +
>> + /* Enable VBUS power switch */
>> + s5p_gpio_direction_output(&gpio1->x2, 6, 1);
>> +
>> + /* VBUS turn ON time */
>> + mdelay(3);
>> +
>> + return 0;
>> +}
>> +#endif
>> +
>> int board_init(void)
>> {
>> gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
>> +#ifdef CONFIG_USB_EHCI_EXYNOS
>> + board_usb_vbus_init();
>> +#endif
>> return 0;
>> }
>>
>> --
>> 1.7.6.5
>>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
