On Wed, Jan 2, 2013 at 4:27 PM, Robert Nelson <robertcnel...@gmail.com> wrote:
> Okay success on another bisect run to find what was causing the Data > Abort with linaro's gcc toolchain.. > gcc version 4.7.3 20121205 (prerelease) (crosstool-NG > linaro-1.13.1-4.7-2012.12-20121214 - Linaro GCC 2012.12) > > Reverting, Troy's last 4 imximage changes: > > ab857f2613be39274d0870768720067ff9d859c0 (imximage: make > set_imx_hdr_v1/v2 easier to read) > ad0826dcd81ba6cf4cc93a4ca8337e1bc676c238 (imximage: change parameters > to set_imx_hdr) > 243319825fa6e79885d57b6b78e72f3fe10ef69c (imximage: delay setting of image > size) > 348ca8efb79652d2b259fbd0ed6d317a77a8cbb9 (imximage: fix size of image > to load.) (this was the first bad bisect, the previous 3 are needed > for a clean revert) > > Along with Fabio's "mx53loco: Call PMIC related functions from > board_late_init()" > > The Dialog based mx53loco is no operating correctly with linaro's toolchain... > > U-Boot 2013.01-rc2-00176-gbc67175-dirty (Jan 02 2013 - 12:14:51) > > Board: MX53 LOCO > I2C: ready > DRAM: 1 GiB > MMC: FSL_SDHC: 0, FSL_SDHC: 1 > *** Warning - bad CRC, using default environment > > In: serial > Out: serial > Err: serial > CPU: Freescale i.MX53 family rev2.0 at 1000 MHz > Reset cause: POR > Net: FEC > Warning: FEC using MAC address from net device > > Hit any key to stop autoboot: 0 > mmc0 is current device > ** Unrecognized filesystem type ** > ** Unrecognized filesystem type ** > Booting from net ... > BOOTP broadcast 1 Thanks for bisecting, Robert. Troy/Stefano, Any suggestions about this? It would be really nice if we could keep mx53loco functional when using gcc 4.6.2. Regards, Fabio Estevam _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
