On Mon, Dec 31, 2012 at 08:14:57AM +0800, Shawn Guo wrote: > The series is to enable the use of eMMC on mx6qsabresd board, so that > we do not need to carry an external card to boot the board. The DDR > mode support for eMMC is not included. > > Shawn Guo (3): > fsl_esdhc: add MMC_MODE_HC host_caps > mx6qsabresd: add usdhc2 and usdhc4 support > mx6qsabresd: use on-board eMMC to store environment > Forgot adding [U-Boot] prefix for these patches. Will do next time.
Shawn > board/freescale/mx6qsabresd/mx6qsabresd.c | 80 > ++++++++++++++++++++++++++--- > drivers/mmc/fsl_esdhc.c | 3 +- > include/configs/mx6qsabre_common.h | 2 - > include/configs/mx6qsabreauto.h | 5 ++ > include/configs/mx6qsabresd.h | 6 +++ > 5 files changed, 87 insertions(+), 9 deletions(-) > > -- > 1.7.9.5 > > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
