This series aims to get all the memory functions running correctly
on sandbox.
There was some discussion about this a while ago, and a commit was
added to show a possible approach:
355a8357 sandbox: Change md command to use map_physmem
This commit was subsequently reverted because it used map_physmem()
instead of the NOP that most architectures need for the memory functions.
This series introduces map_sysmem(), a NOP on all architectures
except sandbox. It allows us to use a ram buffer to which all U-Boot
addresses are relative. The memory commands (including hashing) are
updated to use this so that sandbox can now use those commands.
Half of the mtest code is behind #ifdefs and there is duplication of
some functions in both versions of the memory test. Several patches
here clean this up a bit and get it working on sandbox.
The numeric setenv_ulong() function is a useful way of avoiding a
'char buf[17]; sprintf(buf, "%ld", ...); setenv("...", buf)' sequence.
There is also setenv_addr(). What is missing is setenv_hex() which sets
a ulong in hex format. Add this function and then make use of it in the
main places: common/ drivers/ and net/.
The recently added and very basic hash instructure can help reduce
code duplication in some cases. Redo the crc32 command to use this, and
make it available through the 'hash' command. Also a few bugs were
found in hashing with verify disabled - the arg count was not checked and
a variable declaration was missing.
To permit the memory tester to run on sandbox, we need ctrl-C to work.
To achieve this, add a proper implementation of sandbox's tstc(), with a
simple FIFO for character input. An os_usleep() is added to ensure that
U-Boot does not consume infinite CPU when setting at the command prompt.
With all of this it is possible to use the memory commands in sandbox, as
well as crc32 and the other hashing commands.
Simon Glass (19):
Tidy up error checking and fix bug in hash command
Update print_buffer() to use const
sandbox: Add un/map_sysmen() to deal with sandbox's ram_buf
sandbox: Change memory commands to use map_physmem
Split out the memory tests into separate functions
Use common mtest iteration counting
Fix mtest indenting
Bring mtest putc() into common code
Reduce casting in mtest
Update set_working_fdt_addr() to use setenv_addr()
common: Use new numeric setenv functions
drivers: Use new numeric setenv functions
net: Use new numeric setenv functions
image: Use crc header file instead of C prototypes
Roll crc32 into hash infrastructure
sandbox: config: Enable hash functions and mtest
Move CONFIG_SYS_MEMTEST_SCRATCH #ifdef to top of file
sandbox: Update mtest to fix crashes
sandbox: Allow hash functions to work correctly
Taylor Hutt (1):
sandbox: Improve sandbox serial port keyboard interface
README | 9 +
arch/sandbox/config.mk | 1 +
arch/sandbox/cpu/os.c | 8 +
arch/sandbox/include/asm/io.h | 10 +
common/cmd_bootm.c | 11 +-
common/cmd_cbfs.c | 4 +-
common/cmd_cramfs.c | 4 +-
common/cmd_fdos.c | 4 +-
common/cmd_fdt.c | 11 +-
common/cmd_hash.c | 4 +
common/cmd_jffs2.c | 4 +-
common/cmd_load.c | 12 +-
common/cmd_mem.c | 798 ++++++++++++++++++++---------------------
common/cmd_mtdparts.c | 4 +-
common/cmd_nand.c | 12 +-
common/cmd_nvedit.c | 11 +-
common/cmd_reiser.c | 4 +-
common/cmd_setexpr.c | 39 ++-
common/cmd_unzip.c | 4 +-
common/cmd_ximg.c | 7 +-
common/cmd_zfs.c | 3 +-
common/cmd_zip.c | 4 +-
common/hash.c | 31 ++-
common/image.c | 4 +-
drivers/net/fm/fm.c | 4 +-
drivers/serial/sandbox.c | 44 ++-
fs/fs.c | 4 +-
fs/ubifs/ubifs.c | 4 +-
include/common.h | 29 ++-
include/configs/sandbox.h | 9 +-
include/hash.h | 2 +-
include/os.h | 10 +
include/u-boot/crc.h | 11 +
lib/crc32.c | 9 +
lib/display_options.c | 3 +-
net/net.c | 8 +-
36 files changed, 612 insertions(+), 528 deletions(-)
--
1.7.7.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
