On 12/12/12 23:02, Kyungmin Park wrote:
> Hi,
>
> On Tue, Dec 11, 2012 at 8:01 PM, Ajay Kumar <ajaykumar...@samsung.com> wrote:
>> This patch adds pinmux configuration for backlight, LCD reset
>> and HPD for DP panel on Exynos5 SMDK.
>>
>> Signed-off-by: Ajay Kumar <ajaykumar...@samsung.com>
>> ---
>> arch/arm/cpu/armv7/exynos/pinmux.c | 20 ++++++++++++++++++++
>> arch/arm/include/asm/arch-exynos/periph.h | 1 +
>> 2 files changed, 21 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c
>> b/arch/arm/cpu/armv7/exynos/pinmux.c
>> index f02f441..84f52ea 100644
>> --- a/arch/arm/cpu/armv7/exynos/pinmux.c
>> +++ b/arch/arm/cpu/armv7/exynos/pinmux.c
>> @@ -284,6 +284,23 @@ void exynos5_spi_config(int peripheral)
>> }
>> }
>>
>> +void exynos5_lcd_config()
> missing void
>> +{
>> + struct exynos5_gpio_part1 *gpio1 =
>> + (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
>> +
>> + /* For Backlight */
>> + s5p_gpio_cfg_pin(&gpio1->b2, 0, GPIO_OUTPUT);
>> + s5p_gpio_set_value(&gpio1->b2, 0, 1);
>> +
>> + /* LCD power on */
>> + s5p_gpio_cfg_pin(&gpio1->x1, 5, GPIO_OUTPUT);
>> + s5p_gpio_set_value(&gpio1->x1, 5, 1);
>> +
>> + /* Set Hotplug detect for DP */
>> + s5p_gpio_cfg_pin(&gpio1->x0, 7, GPIO_FUNC(0x3));
> It should be SMDK5250 specific codes, it can't located at common file.
>
You can use the cfg_gpio function at your board file.
Thanks.
Minkyu Kang.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
