On Tue, Dec 11, 2012 at 03:34:11PM -0800, Tom Warren wrote: > This patch series adds basic (boot to cmd prompt) support for Tegra30. > This is based on the Tegra20 SPL, which initializes the AVP (ARM7TDMI) > boot proc) first, then control is transferred to the CPU (A9 quad cluster). > It is based on current u-boot-tegra/next. Some Tegra20 files were
I wasn't able to get these to apply cleanly to u-boot-tegra/next. It failed on the first patch: $ git am ~/twarren Applying: Tegra30: Add arch-tegra30 include files error: patch failed: arch/arm/include/asm/arch-tegra/clk_rst.h:37 error: arch/arm/include/asm/arch-tegra/clk_rst.h: patch does not apply error: patch failed: arch/arm/include/asm/arch-tegra/clock.h:136 error: arch/arm/include/asm/arch-tegra/clock.h: patch does not apply error: patch failed: arch/arm/include/asm/arch-tegra/tegra.h:72 error: arch/arm/include/asm/arch-tegra/tegra.h: patch does not apply error: patch failed: arch/arm/include/asm/arch-tegra20/funcmux.h:62 error: arch/arm/include/asm/arch-tegra20/funcmux.h: patch does not apply error: patch failed: arch/arm/include/asm/arch-tegra20/gp_padctrl.h:61 error: arch/arm/include/asm/arch-tegra20/gp_padctrl.h: patch does not apply Patch failed at 0001 Tegra30: Add arch-tegra30 include files When you have resolved this problem run "git am --resolved". If you would prefer to skip this patch, instead run "git am --skip". To restore the original branch and stop patching run "git am --abort". -- nvpublic _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
