Report the usage of the Advanced Sector Protection (PPB) to the user
upon 'flinfo' command. E.g:
Bank # 1: CFI conformant flash (16 x 16) Size: 64 MB in 512 Sectors
AMD Standard command set, Manufacturer ID: 0x01, Device ID: 0x227E2301
Advanced Sector Protection (PPB) enabled
Erase timeout: 16384 ms, write timeout: 2 ms
Buffer write timeout: 5 ms, buffer size: 32 bytes
Sector Start Addresses:
FC000000 E FC020000 E RO FC040000 E FC060000 E FC080000 E
...
Signed-off-by: Stefan Roese <s...@denx.de>
Cc: Anatolij Gustschin <ag...@denx.de>
Cc: Holger Brunck <holger.bru...@keymile.com>
---
drivers/mtd/cfi_flash.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index 5176d62..adb0a9b 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -1247,6 +1247,8 @@ void flash_print_info (flash_info_t * info)
printf(info->chipwidth == FLASH_CFI_16BIT ? "%04X" : "%02X",
info->device_id2);
}
+ if ((info->vendor == CFI_CMDSET_AMD_STANDARD) && (info->legacy_unlock))
+ printf("\n Advanced Sector Protection (PPB) enabled");
printf ("\n Erase timeout: %ld ms, write timeout: %ld ms\n",
info->erase_blk_tout,
info->write_tout);
--
1.8.0.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
