Follow up to the flash_fixup_stm to fix geometry reversal
on STMicro M29W320ET flash chip. The M29W320DT has 4 erase region.

Signed-off-by: Richard Retanubun <richardretanu...@ruggedcom.com>

---
My baseline is 2009.03-rc1. If there are STMicro/Numonyx guys on
this mailing list, can you help provide a more 'generic' way of
detection? this way the exception list does not have to grow a lot.

  drivers/mtd/cfi_flash.c |    5 +++--
  1 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index a66feac..391d169 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -1806,8 +1806,9 @@ static void flash_fixup_stm(flash_info_t *info, struct 
cfi_qry *qry)
        if (qry->num_erase_regions > 1) {
                /* reverse geometry if top boot part */
                if (info->cfi_version < 0x3131) {
-                       /* CFI < 1.1, guess by device id (only M29W320ET now) */
-                       if (info->device_id == 0x2256) {
+                       /* CFI < 1.1, guess by device id (M29W320{DT,ET} only) 
*/
+                       if (info->device_id == 0x22CA ||
+                           info->device_id == 0x2256) {
                                cfi_reverse_geometry(qry);
                        }
                }
-- 
1.5.6.5

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to