Hi Sebastian, On Sun, Dec 02, 2012 at 03:36:22PM +0100, Sebastian Hesselbarth wrote: > On Dove kwboot can also be used to boot an u-boot image into RAM. > In contrast to Kirkwood, Dove does not support the UART boot mode > sequence but requires the UART boot mode to be selected through > strap pins. The SolidRun CuBox has a push button to allow uart > boot mode but fails on the boot sequence sent by kwboot. > > This patch adds another cmdline option to allow to send a boot > image without the boot sequence and adds support for Dove. > > Signed-off-by: Sebastian Hesselbarth <sebastian.hesselba...@gmail.com> > --- > Cc: u-boot@lists.denx.de > Cc: Sebastian Hesselbarth <sebastian.hesselba...@gmail.com> > Cc: Rabeeh Khoury <rab...@solid-run.com> > Cc: Albert Aribaud <albert.u.b...@aribaud.net> > Cc: Prafulla Wadaskar <prafu...@marvell.com> > Cc: Andy Fleming <aflem...@gmail.com> > Cc: Joe Hershberger <joe.hershber...@gmail.com> > Cc: Daniel Stodden <daniel.stod...@gmail.com> > Cc: Dieter Kiermaier <dk-arm-li...@gmx.de> > --- > tools/Makefile | 2 ++ > tools/kwboot.c | 44 ++++++++++++++++++++++++++++++++++++++++---- > 2 files changed, 42 insertions(+), 4 deletions(-)
Please update the documentation too (doc/kwboot.1). Luka _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
