Hi all, For the EVM board,
$BOARD = evm $CPU = arm_cortexa8 and $ARCH = arm. $VENDOR = omap3 and $SOC = omap3 I can change the check to check BOARD so that it is applicable only To OMAP3 EVMs. ifeq ($(BOARD),evm) LOAD_ADDR = 0x80300000 else Regards Mani > -----Original Message----- > From: Dirk Behme [mailto:dirk.be...@googlemail.com] > Sent: Wednesday, March 04, 2009 5:47 AM > To: u-boot@lists.denx.de > Cc: Nishanth Menon; Pillai, Manikandan > Subject: Re: [U-Boot] [PATCH 1/1] Fix for running examples on OMAP3 EVM board > > Nishanth Menon wrote: > > Manikandan Pillai said the following on 03/03/2009 05:40 AM: > >> Example binaries to be downloaded to 0x80300000 for OMAP3 EVMs. > >> > >> Signed-off-by: Manikandan Pillai <mani.pil...@ti.com> > >> --- > >> examples/Makefile | 4 ++++ > >> 1 files changed, 4 insertions(+), 0 deletions(-) > >> > >> diff --git a/examples/Makefile b/examples/Makefile > >> index dbcfa92..75e6c87 100644 > >> --- a/examples/Makefile > >> +++ b/examples/Makefile > >> @@ -36,10 +36,14 @@ else > >> ifeq ($(CPU),omap3) > >> LOAD_ADDR = 0x80300000 > >> else > >> +ifeq ($(CPU),arm_cortexa8) > >> +LOAD_ADDR = 0x80300000 > >> +else > >> > > I am bit confused here.. first we say $(CPU) omap3...EVM is based on > > omap3 rt? > > the second change is not valid -> cortex_a8 -> we might have future > > platforms which have cortex. they need not use the same memory map as > > OMAP does. this is not valid change. NAK from me. > > Even if it becomes boring, I agree to Nishanth again. NACK from me, too. > > Best regards > > Dirk _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
