Dear Anatolij Gustschin, In message <49a3ce71.8040...@denx.de> you wrote: > Dear Wolfgang, > > The following changes since commit bd76729bcbfd64b5d016a9b936f058931fc06eaf: > Becky Bruce (1): > MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default > > are available in the git repository at: > > git://git.denx.de/u-boot-video.git master > > Guennadi Liakhovetski (7): > i.MX31: fix SPI driver for shorter than 32 bit > i.MX31: add a simple gpio driver > i.MX31: support GPIO as a chip-select in the mxc_spi driver > A driver for the S6E63D6 SPI display controller from Samsung > LCD: support 8bpp BMPs on 16bpp displays > video: add an i.MX31 framebuffer driver > ARM: add an "eet" variant of the imx31_phycore board > > Mark Jackson (1): > Add 16bpp BMP support > > Makefile | 6 +- > board/imx31_phycore/imx31_phycore.c | 57 +++ > common/lcd.c | 100 +++-- > drivers/gpio/Makefile | 3 +- > drivers/gpio/mx31_gpio.c | 73 +++ > drivers/spi/mxc_spi.c | 93 +++- > drivers/video/Makefile | 2 + > drivers/video/mx3fb.c | 856 > +++++++++++++++++++++++++++++++++ > drivers/video/s6e63d6.c | 76 +++ > include/asm-arm/arch-mx31/mx31-regs.h | 16 + > include/asm-arm/arch-mx31/mx31.h | 20 + > include/configs/imx31_phycore.h | 23 + > include/lcd.h | 21 +- > include/s6e63d6.h | 37 ++ > 14 files changed, 1325 insertions(+), 58 deletions(-) > create mode 100644 drivers/gpio/mx31_gpio.c > create mode 100644 drivers/video/mx3fb.c > create mode 100644 drivers/video/s6e63d6.c > create mode 100644 include/s6e63d6.h
Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de If the hours are long enough and the pay is short enough, someone will say it's women's work. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
