> i'm using u-boot -1.3.0 in MPC8313 evaluation board, it having a NAND , NOR
> Flash , u-boot stored in NOR flash. when i do the saveenv , reset command
> the u-boot is erased. i'm not able to fix  this issue.  help me to fix this
> issue
> 
On my board this was due to CONFIG_SYS_MONITOR_LEN not being big enough.

Peter


_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to