Dear Piyush Shah, In message <ad27f3010902170532y4e6f8c68vfc0f240e14fcb...@mail.gmail.com> you wrote: > > I had read somewhere that if, while using netconsole, we dont set
Somewhere? Maybe in doc/README.NetConsole ? > ncip, the messages are broadcast. > In that case, if I send commands to my target (where u-boot is > running) from my Linux host, > since ncip is not set, will it accept them? 'ncip' is used to set the IP address and the port of the *destination*. This has nothing to do with your target's IP address which still must be specified using 'ipaddr'. > My requirement is that, when I press a particular switch on my board, > the console should get transferred to netconsole, but the ncip should > not be pre-decided No problem with that. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de "The X11 source code style is ATROCIOUS and should not be used as a model." - Doug Gwyn _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
