Hi all,
I have two JFFS2 images, both with the _same_ kernel inside.
But the images differs in size, cause one is for debugging and has
some additional apps:
debug.im = 13 MB
release.im = 6.2 MB
Im loading kernel and dtb via fsload:
fsload 2000000 uImage
fsload 4000000 mpc8343.dtb
bootm 2000000 - 4000000
When I use release.im, no problems. But when I use debug.im:
Verifying Checksum ... OK
Uncompressing Kernel Image ... Error: inflateInit2() returned -4
GUNZIP ERROR - must RESET board to recover
Resetting the board.
In u-boot/include/zlib.h:232:
#define Z_MEM_ERROR (-4)
In u-boot/lib_generic/zlib.c:342: (inflateInit2() function)
--------
if ((z->state = (struct internal_state FAR *)
ZALLOC(z,1,sizeof(struct internal_state))) == Z_NULL)
return Z_MEM_ERROR;
--------
Any ideas why this is happening?
Maybe scanning JFFS2 is consuming a lot of memory?
My board has 128 MB of DDR SDRAM, I think space is not a problem, so
is there a place that I can set for exemple max values for
allocations?
Im using U-boot-1.2.0.
Cheers,
--
Alemao
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
