judging from other printfs in the same file, it seems ata should be
postpended with the interface number, not the address of the global
port variable. Fixes this for current u-boot-mpc83xx tree:
Configuring for MPC8349ITX board...
sata_sil3114.c: In function 'sata_bus_softreset':
sata_sil3114.c:99: warning: format '%u' expects type 'unsigned int', but
argument 2 has type 'struct sata_port *'
sata_sil3114.c:108: warning: format '%u' expects type 'unsigned int', but
argument 2 has type 'struct sata_port *'
Signed-off-by: Kim Phillips <kim.phill...@freescale.com>
---
drivers/block/sata_sil3114.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/block/sata_sil3114.c b/drivers/block/sata_sil3114.c
index 351cf99..62cc99d 100644
--- a/drivers/block/sata_sil3114.c
+++ b/drivers/block/sata_sil3114.c
@@ -96,7 +96,7 @@ static int sata_bus_softreset (int num)
}
if (status & ATA_BUSY) {
- printf ("ata%u is slow to respond,plz be patient\n", port);
+ printf ("ata%u is slow to respond,plz be patient\n", num);
}
while ((status & ATA_BUSY)) {
@@ -105,7 +105,7 @@ static int sata_bus_softreset (int num)
}
if (status & ATA_BUSY) {
- printf ("ata%u failed to respond : ", port);
+ printf ("ata%u failed to respond : ", num);
printf ("bus reset failed\n");
port[num].dev_mask = 0;
return 1;
--
1.6.1.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
