Hello I am porting U-BOOT on an MPC8560ADS like custom board with 1GB DDR SDRAM. My minicom port is connected to SCC1 of MPC8560 on 9600 8N1 baud rate. After relocation of U-BOOT in RAM prints stops coming
My boot flash 0xfff80000 - 0xffffffff TEXT_BASE = 0xfff80000 Using emulator I took dump of SDRAM. U-BOOT code is there. Any idea why prints are not coming with regards, Deepak Gaur _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
