Dear Mike Frysinger, In message <200902111654.20726.vap...@gentoo.org> you wrote: > > > And you fail to explain why BF needs this, while all other > > architectures don't. > > i explained it already when Ben asked. the processor variant is selected in > the board config and the board config (and shared settings) can change based > on that selection. and the top level build flags use that processor
If you define the processor variant right at the beginning of the board config file, then why would that not be visible in the remainder of the board config so you'd have to re-run this? > selection. first one is to make sure the cpu settings make it from the board > config into the environment while the second is to make sure the board config > has been fully processed by the proper cpu selection. I still don;t get why BF has such a problem while none of the N other arches has it? > also, other people dont seem to have a problem sprinkling duplication over > the > place until things work. i do. What exactly are you referring to here? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de 2000 pounds of chinese soup = 1 Won Ton _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
