From: Alessandro Rubini <rub...@unipv.it>
This trivially enables Ethernet support in the debug board
by setting up the proper chip select.
Signed-off-by: Alessandro Rubini <rub...@unipv.it>
Acked-by: Andrea Gallo <andrea.ga...@stnwireless.com>
---
board/st/nmdk8815/nmdk8815.c | 5 ++++-
include/configs/nmdk8815.h | 3 +++
2 files changed, 7 insertions(+), 1 deletions(-)
diff --git a/board/st/nmdk8815/nmdk8815.c b/board/st/nmdk8815/nmdk8815.c
index c54eac1..9a7242f 100644
--- a/board/st/nmdk8815/nmdk8815.c
+++ b/board/st/nmdk8815/nmdk8815.c
@@ -49,8 +49,11 @@ int board_init(void)
writel(0x00000000, NOMADIK_GPIO1_BASE + 0x28);
writel(readl(NOMADIK_SRC_BASE) | 0x8000, NOMADIK_SRC_BASE);
- icache_enable();
+ /* Set up SMCS1 for Ethernet: sram-like, enabled, timing values */
+ writel(0x0000305b, NOMADIK_FSMC_BASE + 0x08); /* FSMC_BCR1 */
+ writel(0x00033f33, NOMADIK_FSMC_BASE + 0x0c); /* FSMC_BTR1 */
+ icache_enable();
return 0;
}
diff --git a/include/configs/nmdk8815.h b/include/configs/nmdk8815.h
index 7a503e0..23a7323 100644
--- a/include/configs/nmdk8815.h
+++ b/include/configs/nmdk8815.h
@@ -35,8 +35,11 @@
/* commands */
#include <config_cmd_default.h>
+
+#define CONFIG_CMD_NET
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NFS
/* There is no NOR flash, so undefine these commands */
#undef CONFIG_CMD_FLASH
#undef CONFIG_CMD_IMLS
--
1.6.0.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
