Added new CONFIG options for the three type of MAC-PHY interconnect and
applied them all relevant board config files
Signed-off-by: Ben Warren <biggerbadder...@gmail.com>
---
Note: compile tested only, since I don't have any 5xxx hardware
drivers/net/mpc5xxx_fec.c | 28 +++-------------------------
include/configs/BC3450.h | 5 +++--
include/configs/IceCube.h | 8 +++-----
include/configs/PM520.h | 5 +++--
include/configs/TB5200.h | 5 +++--
include/configs/TOP5200.h | 2 +-
include/configs/TQM5200.h | 5 +++--
include/configs/Total5200.h | 1 +
include/configs/canmb.h | 1 +
include/configs/cm5200.h | 1 +
include/configs/cpci5200.h | 1 +
include/configs/hmi1001.h | 1 +
include/configs/inka4x0.h | 5 +++--
include/configs/jupiter.h | 5 +++--
include/configs/mcc200.h | 7 ++++---
include/configs/mecp5200.h | 5 +++--
include/configs/motionpro.h | 1 +
include/configs/mucmc52.h | 1 +
include/configs/munices.h | 1 +
include/configs/o2dnt.h | 5 +++--
include/configs/pf5200.h | 5 +++--
include/configs/uc101.h | 1 +
include/configs/v38b.h | 1 +
23 files changed, 48 insertions(+), 52 deletions(-)
diff --git a/drivers/net/mpc5xxx_fec.c b/drivers/net/mpc5xxx_fec.c
index f8618b1..2bf901e 100644
--- a/drivers/net/mpc5xxx_fec.c
+++ b/drivers/net/mpc5xxx_fec.c
@@ -19,9 +19,6 @@ DECLARE_GLOBAL_DATA_PTR;
/* #define DEBUG 0x28 */
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) && \
- defined(CONFIG_MPC5xxx_FEC)
-
#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII))
#error "CONFIG_MII has to be defined!"
#endif
@@ -891,28 +888,11 @@ int mpc5xxx_fec_initialize(bd_t * bis)
fec->eth = (ethernet_regs *)MPC5XXX_FEC;
fec->tbdBase = (FEC_TBD *)FEC_BD_BASE;
fec->rbdBase = (FEC_RBD *)(FEC_BD_BASE + FEC_TBD_NUM * sizeof(FEC_TBD));
-#if defined(CONFIG_CANMB) || \
- defined(CONFIG_CM5200) || \
- defined(CONFIG_HMI1001) || \
- defined(CONFIG_ICECUBE) || \
- defined(CONFIG_INKA4X0) || \
- defined(CONFIG_JUPITER) || \
- defined(CONFIG_MCC200) || \
- defined(CONFIG_MOTIONPRO) || \
- defined(CONFIG_MUCMC52) || \
- defined(CONFIG_O2DNT) || \
- defined(CONFIG_PM520) || \
- defined(CONFIG_TOP5200) || \
- defined(CONFIG_TQM5200) || \
- defined(CONFIG_UC101) || \
- defined(CONFIG_V38B) || \
- defined(CONFIG_MUNICES)
-# ifndef CONFIG_FEC_10MBIT
+#if defined(CONFIG_MPC5xxx_FEC_MII100)
fec->xcv_type = MII100;
-# else
+#elif defined(CONFIG_MPC5xxx_FEC_MII10)
fec->xcv_type = MII10;
-# endif
-#elif defined(CONFIG_TOTAL5200)
+#elif defined(CONFIG_MPC5xxx_FEC_SEVENWIRE)
fec->xcv_type = SEVENWIRE;
#else
#error fec->xcv_type not initialized.
@@ -1064,5 +1044,3 @@ static uint32 local_crc32(char *string, unsigned int
crc_value, int len)
/**/ return crc;
}
#endif /* DEBUG */
-
-#endif /* CONFIG_MPC5xxx_FEC */
diff --git a/include/configs/BC3450.h b/include/configs/BC3450.h
index 28be8dd..bced118 100644
--- a/include/configs/BC3450.h
+++ b/include/configs/BC3450.h
@@ -396,10 +396,11 @@
/*
* Ethernet configuration
*
- * Define CONFIG_FEC10MBIT to force FEC at 10MBIT
+ * Define CONFIG_MPC5xxx_MII10 to force FEC at 10MBIT
*/
#define CONFIG_MPC5xxx_FEC 1
-#undef CONFIG_FEC_10MBIT
+#define CONFIG_MPC5xxx_FEC_MII100
+#undef CONFIG_MPC5xxx_MII10
#define CONFIG_PHY_ADDR 0x00
/*
diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h
index f8c94ec..5ef0b77 100644
--- a/include/configs/IceCube.h
+++ b/include/configs/IceCube.h
@@ -293,14 +293,12 @@
* Ethernet configuration
*/
#define CONFIG_MPC5xxx_FEC 1
+#define CONFIG_MPC5xxx_FEC_MII100
/*
- * Define CONFIG_FEC_10MBIT to force FEC at 10Mb
+ * Define CONFIG_MPC5xxx_FEC_MII10 to force FEC at 10Mb
*/
-/* #define CONFIG_FEC_10MBIT 1 */
+/* #define CONFIG_MPC5xxx_FEC_MII10 */
#define CONFIG_PHY_ADDR 0x00
-#if defined(CONFIG_LITE5200B)
-#define CONFIG_FEC_MII100 1
-#endif
/*
* GPIO configuration
diff --git a/include/configs/PM520.h b/include/configs/PM520.h
index e250e03..ff73ef9 100644
--- a/include/configs/PM520.h
+++ b/include/configs/PM520.h
@@ -279,10 +279,11 @@
* Ethernet configuration
*/
#define CONFIG_MPC5xxx_FEC 1
+#define CONFIG_MPC5xxx_FEC_MII100
/*
- * Define CONFIG_FEC_10MBIT to force FEC at 10Mb
+ * Define CONFIG_MPC5xxx_FEC_MII10 to force FEC at 10Mb
*/
-/* #define CONFIG_FEC_10MBIT 1 */
+/* #define CONFIG_MPC5xxx_FEC_MII10 */
#define CONFIG_PHY_ADDR 0x00
/*
diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h
index 6010246..b42d3d9 100644
--- a/include/configs/TB5200.h
+++ b/include/configs/TB5200.h
@@ -344,10 +344,11 @@
* Ethernet configuration
*/
#define CONFIG_MPC5xxx_FEC 1
+#define CONFIG_MPC5xxx_FEC_MII100
/*
- * Define CONFIG_FEC_10MBIT to force FEC at 10Mb
+ * Define CONFIG_MPC5xxx_FEC_MII10 to force FEC at 10Mb
*/
-/* #define CONFIG_FEC_10MBIT 1 */
+/* #define CONFIG_MPC5xxx_FEC_MII10 */
#define CONFIG_PHY_ADDR 0x00
/*
diff --git a/include/configs/TOP5200.h b/include/configs/TOP5200.h
index 046948e..50197f4 100644
--- a/include/configs/TOP5200.h
+++ b/include/configs/TOP5200.h
@@ -312,7 +312,7 @@
* Ethernet configuration
*/
#define CONFIG_MPC5xxx_FEC 1
-#define CONFIG_FEC_10MBIT 1 /* Workaround for FEC 100Mbit
problem */
+#define CONFIG_MPC5xxx_FEC_MII10 /* Workaround for FEC 100Mbit problem */
#define CONFIG_PHY_ADDR 0x1f
#define CONFIG_PHY_TYPE 0x79c874
/*
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index db7f51d..6850eba 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -507,10 +507,11 @@
* Ethernet configuration
*/
#define CONFIG_MPC5xxx_FEC 1
+#define CONFIG_MPC5xxx_FEC_MII100
/*
- * Define CONFIG_FEC_10MBIT to force FEC at 10Mb
+ * Define CONFIG_MPC5xxx_FEC_MII10 to force FEC at 10Mb
*/
-/* #define CONFIG_FEC_10MBIT 1 */
+/* #define CONFIG_MPC5xxx_FEC_MII10 */
#define CONFIG_PHY_ADDR 0x00
/*
diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h
index 75d1985..9a75848 100644
--- a/include/configs/Total5200.h
+++ b/include/configs/Total5200.h
@@ -268,6 +268,7 @@
* Ethernet configuration
*/
#define CONFIG_MPC5xxx_FEC 1
+#define CONFIG_MPC5xxx_FEC_SEVENWIRE
/* dummy, 7-wire FEC does not have phy address */
#define CONFIG_PHY_ADDR 0x00
diff --git a/include/configs/canmb.h b/include/configs/canmb.h
index ff7b6e5..1f275e5 100644
--- a/include/configs/canmb.h
+++ b/include/configs/canmb.h
@@ -173,6 +173,7 @@
* Ethernet configuration
*/
#define CONFIG_MPC5xxx_FEC 1
+#define CONFIG_MPC5xxx_FEC_MII100
#define CONFIG_PHY_ADDR 0x0
/*
* GPIO configuration:
diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h
index 620ffea..ddcc6aa 100644
--- a/include/configs/cm5200.h
+++ b/include/configs/cm5200.h
@@ -65,6 +65,7 @@
* Ethernet configuration
*/
#define CONFIG_MPC5xxx_FEC 1
+#define CONFIG_MPC5xxx_FEC_MII100
#define CONFIG_PHY_ADDR 0x00
#define CONFIG_ENV_OVERWRITE 1 /* allow overwriting of ethaddr */
/* use misc_init_r() to read ethaddr from I2C EEPROM (see
CONFIG_SYS_I2C_EEPROM) */
diff --git a/include/configs/cpci5200.h b/include/configs/cpci5200.h
index b9dabac..e5f357d 100644
--- a/include/configs/cpci5200.h
+++ b/include/configs/cpci5200.h
@@ -259,6 +259,7 @@
* Ethernet configuration
*/
#define CONFIG_MPC5xxx_FEC 1
+#define CONFIG_MPC5xxx_FEC_MII100
/*
* Define CONFIG_FEC_10MBIT to force FEC at 10Mb
*/
diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h
index 16b06cd..a81527e 100644
--- a/include/configs/hmi1001.h
+++ b/include/configs/hmi1001.h
@@ -215,6 +215,7 @@
* Ethernet configuration
*/
#define CONFIG_MPC5xxx_FEC 1
+#define CONFIG_MPC5xxx_FEC_MII100
#define CONFIG_PHY_ADDR 0x00
#define CONFIG_MII 1 /* MII PHY management
*/
diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h
index 405234c..e42fa6d 100644
--- a/include/configs/inka4x0.h
+++ b/include/configs/inka4x0.h
@@ -221,10 +221,11 @@
* Ethernet configuration
*/
#define CONFIG_MPC5xxx_FEC 1
+#define CONFIG_MPC5xxx_FEC_MII100
/*
- * Define CONFIG_FEC_10MBIT to force FEC at 10Mb
+ * Define CONFIG_MPC5xxx_FEC_MII10 to force FEC at 10Mb
*/
-/* #define CONFIG_FEC_10MBIT 1 */
+/* #define CONFIG_MPC5xxx_FEC_MII10 */
#define CONFIG_PHY_ADDR 0x00
#define CONFIG_MII
diff --git a/include/configs/jupiter.h b/include/configs/jupiter.h
index 2ebe370..9c45acf 100644
--- a/include/configs/jupiter.h
+++ b/include/configs/jupiter.h
@@ -239,10 +239,11 @@
* Ethernet configuration
*/
#define CONFIG_MPC5xxx_FEC 1
+#define CONFIG_MPC5xxx_FEC_MII100
/*
- * Define CONFIG_FEC_10MBIT to force FEC at 10Mb
+ * Define CONFIG_MPC5xxx_FEC_MII10 to force FEC at 10Mb
*/
-/* #define CONFIG_FEC_10MBIT 1 */
+/* #define CONFIG_MPC5xxx_FEC_MII10 */
#define CONFIG_PHY_ADDR 0x00
/*
diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h
index e64cc37..e5812ee 100644
--- a/include/configs/mcc200.h
+++ b/include/configs/mcc200.h
@@ -271,11 +271,12 @@
/*
* Ethernet configuration
*/
-/*#define CONFIG_MPC5xxx_FEC 1*/
+/* #define CONFIG_MPC5xxx_FEC 1 */
+/* #define CONFIG_MPC5xxx_FEC_MII100 */
/*
- * Define CONFIG_FEC_10MBIT to force FEC at 10Mb
+ * Define CONFIG_MPC5xxx_FEC_MII10 to force FEC at 10Mb
*/
-/* #define CONFIG_FEC_10MBIT 1 */
+/* #define CONFIG_MPC5xxx_FEC_MII10 */
#define CONFIG_PHY_ADDR 1
/*
diff --git a/include/configs/mecp5200.h b/include/configs/mecp5200.h
index 7ef5bdf..4a93b58 100644
--- a/include/configs/mecp5200.h
+++ b/include/configs/mecp5200.h
@@ -243,10 +243,11 @@
* Ethernet configuration
*/
#define CONFIG_MPC5xxx_FEC 1
+#define CONFIG_MPC5xxx_FEC_MII100
/*
- * Define CONFIG_FEC_10MBIT to force FEC at 10Mb
+ * Define CONFIG_MPC5xxx_FEC_MII10 to force FEC at 10Mb
*/
-/* #define CONFIG_FEC_10MBIT 1 */
+/* #define CONFIG_MPC5xxx_FEC_MII10 */
#define CONFIG_PHY_ADDR 0x00
#define CONFIG_UDP_CHECKSUM 1
diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h
index b3f16d5..e6e3729 100644
--- a/include/configs/motionpro.h
+++ b/include/configs/motionpro.h
@@ -82,6 +82,7 @@
* Ethernet configuration
*/
#define CONFIG_MPC5xxx_FEC 1
+#define CONFIG_MPC5xxx_FEC_MII100
#define CONFIG_PHY_ADDR 0x2
#define CONFIG_PHY_TYPE 0x79c874
#define CONFIG_RESET_PHY_R 1
diff --git a/include/configs/mucmc52.h b/include/configs/mucmc52.h
index 2f48a0f..ae60cd2 100644
--- a/include/configs/mucmc52.h
+++ b/include/configs/mucmc52.h
@@ -225,6 +225,7 @@
* Ethernet configuration
*/
#define CONFIG_MPC5xxx_FEC 1
+#define CONFIG_MPC5xxx_FEC_MII100
#define CONFIG_PHY_ADDR 0x00
#define CONFIG_MII 1 /* MII PHY management
*/
diff --git a/include/configs/munices.h b/include/configs/munices.h
index 7682faa..fa5230f 100644
--- a/include/configs/munices.h
+++ b/include/configs/munices.h
@@ -166,6 +166,7 @@
* Ethernet configuration
*/
#define CONFIG_MPC5xxx_FEC 1
+#define CONFIG_MPC5xxx_FEC_MII100
#define CONFIG_PHY_ADDR 0x01
#define CONFIG_MII 1
diff --git a/include/configs/o2dnt.h b/include/configs/o2dnt.h
index bfae7b4..18e7cc2 100644
--- a/include/configs/o2dnt.h
+++ b/include/configs/o2dnt.h
@@ -233,10 +233,11 @@
* Ethernet configuration
*/
#define CONFIG_MPC5xxx_FEC 1
+#define CONFIG_MPC5xxx_FEC_MII100
/*
- * Define CONFIG_FEC_10MBIT to force FEC at 10Mb
+ * Define CONFIG_MPC5xxx_FEC_MII10 to force FEC at 10Mb
*/
-/* #define CONFIG_FEC_10MBIT 1 */
+/* #define CONFIG_MPC5xxx_FEC_MII10 */
#define CONFIG_PHY_ADDR 0x00
/*
diff --git a/include/configs/pf5200.h b/include/configs/pf5200.h
index b2e2a1c..8ca55d7 100644
--- a/include/configs/pf5200.h
+++ b/include/configs/pf5200.h
@@ -245,10 +245,11 @@
* Ethernet configuration
*/
#define CONFIG_MPC5xxx_FEC 1
+#define CONFIG_MPC5xxx_FEC_MII100
/*
- * Define CONFIG_FEC_10MBIT to force FEC at 10Mb
+ * Define CONFIG_MPC5xxx_FEC_MII10 to force FEC at 10Mb
*/
-/* #define CONFIG_FEC_10MBIT 1 */
+/* #define CONFIG_MPC5xxx_FEC_MII10 */
#define CONFIG_PHY_ADDR 0x00
#define CONFIG_UDP_CHECKSUM 1
diff --git a/include/configs/uc101.h b/include/configs/uc101.h
index 553eb25..87cb4e5 100644
--- a/include/configs/uc101.h
+++ b/include/configs/uc101.h
@@ -233,6 +233,7 @@
* Ethernet configuration
*/
#define CONFIG_MPC5xxx_FEC 1
+#define CONFIG_MPC5xxx_FEC_MII100
#define CONFIG_PHY_ADDR 0x00
#define CONFIG_MII 1
diff --git a/include/configs/v38b.h b/include/configs/v38b.h
index 0156ce1..fc7128e 100644
--- a/include/configs/v38b.h
+++ b/include/configs/v38b.h
@@ -247,6 +247,7 @@
* Ethernet configuration
*/
#define CONFIG_MPC5xxx_FEC 1
+#define CONFIG_MPC5xxx_FEC_MII100
#define CONFIG_PHY_ADDR 0x00
#define CONFIG_MII 1
--
1.5.6.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
