Hi,
I have compiled u-boot (for nand flash, using canyonlands_nand_config) for
the canyonlands board having a PPC460Ex. I have flashed the u-boot-nand.bin to
the NAND flash. When I boot from the NAND flash the u-boot starts giving
outputs onto minicom, but it hangs after just a few statements.
U-Boot 1.3.4-00380-g302e52e (Sep 8 2008 - 15:37:41)
CPU: AMCC PowerPC 460EX Rev. A at 600 MHz (PLB=200, OPB=100, EBC=100 MHz)
Security/Kasumi support
Bootstrap Option H - Boot ROM Location I2C (Addr 0x52)
Internal PCI arbiter disabled
32 kB I-Cache 32 kB D-Cache
Board: Canyonlands - AMCC PPC460EX Evaluation Board, 2*PCIe, Rev. 16
I2C: ready
DTT: 1 is 47 C
DRAM: 512 MB
Has anybody faced this issue?
Regards,
Afzal Nadirshah
________________________________
http://www.mindtree.com/email/disclaimer.html
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
