Hi, I designed a new AT91SAM9263 Board using the schematics of the Atmel AT91SAM9263-EK EVAL Board. I have a problem in the ethernet path. Running auto negotiation (Davicom DM9161A PHY) creates a connection with 100MBit/Half - Duplex. With the original Atmel Board Full duplex is possible. I tried this with U-Boot 2008/10 and Linux 2.6.24. TFTP from Host to our Board is ok, PING from Board to Host too, but not from Host to our Board. Reading back the auto-negotiation advertisment register (ANAR 0x04) shows 0x00a1, when writing 0x01c1 before. What's wrong?
best regards Josef Baumann Prime Mess- und Regeltechnik Prinz-Eugen-Str. 65 94034 Passau Tel.: +49-851-41041 Fax.: +49-851-41042 web: www.prime-micro.de _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
