Dear Mike Frysinger,
In message <1233167355-5901-1-git-send-email-vap...@gentoo.org> you wrote:
> The following changes since commit 2b6fd5c77db9c6ed3cea9799c86ff922cf0107b2:
> Kim Phillips (1):
> mpc83xx: fix undefined reference to `flush_cache' error in simpc8313
> build
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-blackfin.git master
>
> Mike Frysinger (39):
> Blackfin: add defines to describe active bootrom behavior
> Blackfin: add bit defines for DDR parts
> Blackfin: convert CMD_LINE_ADDR to CONFIG_LINUX_CMDLINE_{ADDR,SIZE}
> Blackfin: set more sane default board config values
> Blackfin: rename bootm.c to boot.c
> Blackfin: abort dma_memcpy() for L1 scratchpad
> Blackfin: split cache handling out of dma_memcpy()
> Blackfin: minimize time cache is turned off when replacing cplb entries
> Blackfin: pass --bmode/--initcode when creating ldr
> Blackfin: dont generate ldrs with --force
> Blackfin: fix dcache handling when doing dma memcpy's
> Blackfin: bfin_mac: update port muxing
> Blackfin: do not init i2c in Blackfin board init
> Blackfin: implement general support for CONFIG_STATUS_LED
> Blackfin: respect/check CONFIG_SYS_GBL_DATA_SIZE
> Blackfin: respect CONFIG_SYS_MONITOR_LEN for default flash protection
> Blackfin: overhaul i2c driver
> Blackfin: bf533-ezkit: shuffle flash defines a little
> Blackfin: drop dead/wrong debug code in initdram()
> Blackfin: bf537-stamp nand: fix more style errors in previous commit
> Blackfin: tighten up post memory coding style
> Blackfin: resurrect BF533-STAMP video splash driver
> Blackfin: punt unused BF533-STAMP definitions
> Blackfin: set default boot SPI CS for BF538/BF539
> Blackfin: use common memcpy routine during init
> Blackfin: respect CONFIG_CLKIN_HALF
> Blackfin: add portmuxing for UARTs on the BF51x
> Blackfin: just set SP register directly during init
> Blackfin: clarify relocation comment during init
> Blackfin: pass RETX to Linux
> Blackfin: handle new anomalies with reset
> Blackfin: support console-over-JTAG
> Blackfin: allow serial console to be disabled
> Blackfin: update on-chip ROM API
> Blackfin: implement real write support for OTP
> Blackfin: bootldr: implement BF53x/BF56x LDR loader
> Blackfin: bf533-stamp: rewrite resource swap logic
> Blackfin: convert old boards to use COBJS-y Makefile style
> Blackfin: fixup misc warnings such as printf's and missing casts
>
> Makefile | 2 +-
> blackfin_config.mk | 4 +
> board/bf533-ezkit/Makefile | 8 +-
> board/bf533-ezkit/bf533-ezkit.c | 23 +-
> board/bf533-ezkit/flash-defines.h | 4 +-
> board/bf533-ezkit/flash.c | 10 +-
> board/bf533-stamp/Makefile | 12 +-
> board/bf533-stamp/bf533-stamp.c | 50 +--
> board/bf533-stamp/bf533-stamp.h | 3 -
> board/bf533-stamp/video.c | 167 +++++++++
> board/bf533-stamp/video.h | 25 ++
> board/bf537-stamp/Makefile | 10 +-
> board/bf537-stamp/bf537-stamp.c | 14 +-
> board/bf537-stamp/nand.c | 9 +-
> board/bf537-stamp/post-memory.c | 23 +-
> board/bf537-stamp/spi_flash.c | 8 +-
> board/bf561-ezkit/Makefile | 8 +-
> board/bf561-ezkit/bf561-ezkit.c | 14 +-
> common/cmd_bootldr.c | 135 +++++++-
> common/cmd_cplbinfo.c | 4 +-
> common/cmd_otp.c | 163 +++++++---
> common/devices.c | 3 +
> cpu/blackfin/Makefile | 9 +-
> cpu/blackfin/cache.S | 4 +-
> cpu/blackfin/cpu.c | 6 +
> cpu/blackfin/i2c.c | 428
> -----------------------
> cpu/blackfin/initcode.c | 2 +-
> cpu/blackfin/jtag-console.c | 125 +++++++
> cpu/blackfin/reset.c | 20 +-
> cpu/blackfin/serial.c | 4 +
> cpu/blackfin/serial.h | 15 +-
> cpu/blackfin/start.S | 41 +--
> cpu/blackfin/traps.c | 52 +--
> drivers/i2c/Makefile | 1 +
> drivers/i2c/bfin-twi_i2c.c | 285 +++++++++++++++
> drivers/net/bfin_mac.c | 47 ++-
> include/asm-blackfin/blackfin-config-post.h | 84 ++++-
> include/asm-blackfin/blackfin_local.h | 2 +-
> include/asm-blackfin/mach-common/bits/bootrom.h | 72 +++--
> include/asm-blackfin/mach-common/bits/ebiu.h | 21 +-
> include/asm-blackfin/mach-common/bits/otp.h | 21 +-
> include/configs/bf533-ezkit.h | 2 +-
> include/configs/bf533-stamp.h | 2 +-
> include/configs/bf537-stamp.h | 43 +--
> include/devices.h | 3 +
> include/status_led.h | 3 +
> lib_blackfin/Makefile | 2 +-
> lib_blackfin/board.c | 37 +-
> lib_blackfin/{bootm.c => boot.c} | 19 +-
> lib_blackfin/string.c | 45 ++-
> 50 files changed, 1270 insertions(+), 824 deletions(-)
> create mode 100644 board/bf533-stamp/video.c
> create mode 100644 board/bf533-stamp/video.h
> delete mode 100644 cpu/blackfin/i2c.c
> create mode 100644 cpu/blackfin/jtag-console.c
> create mode 100644 drivers/i2c/bfin-twi_i2c.c
> rename lib_blackfin/{bootm.c => boot.c} (68%)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
Hi there! This is just a note from me, to you, to tell you, the per-
son reading this note, that I can't think up any more famous quotes,
jokes, nor bizarre stories, so you may as well go home.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
