Dear Stefan Roese, In message <200901261047.36562...@denx.de> you wrote: > The following changes since commit 8f86a3636ef88427f880610638e80991adc41896: > Wolfgang Denk (1): > Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx > > are available in the git repository at: > > git://www.denx.de/git/u-boot-ppc4xx.git master > > Dirk Eibach (2): > ppc4xx: Improve DDR autodetect > ppc4xx: Add GDsys PowerPC 440 ETX board support. > > Matthias Fuchs (1): > ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files > > Stefan Roese (1): > ppc4xx: Remove compilation warning in gdppc440etc.c > > MAINTAINERS | 1 + > MAKEALL | 1 + > Makefile | 3 + > board/gdsys/gdppc440etx/Makefile | 51 +++++ > board/gdsys/gdppc440etx/config.mk | 44 +++++ > board/gdsys/gdppc440etx/gdppc440etx.c | 323 > +++++++++++++++++++++++++++++++++ > board/gdsys/gdppc440etx/init.S | 75 ++++++++ > board/gdsys/gdppc440etx/u-boot.lds | 144 +++++++++++++++ > cpu/ppc4xx/sdram.c | 55 +++++- > include/configs/ASH405.h | 1 - > include/configs/CATcenter.h | 1 - > include/configs/CMS700.h | 1 - > include/configs/CPCI2DP.h | 1 - > include/configs/CPCI405.h | 1 - > include/configs/CPCI4052.h | 1 - > include/configs/CPCI405AB.h | 1 - > include/configs/CPCI405DT.h | 1 - > include/configs/DP405.h | 1 - > include/configs/G2000.h | 1 - > include/configs/HH405.h | 1 - > include/configs/HUB405.h | 1 - > include/configs/OCRTC.h | 1 - > include/configs/ORSG.h | 1 - > include/configs/PCI405.h | 1 - > include/configs/PLU405.h | 1 - > include/configs/PMC405.h | 1 - > include/configs/PPChameleonEVB.h | 1 - > include/configs/VOH405.h | 1 - > include/configs/VOM405.h | 1 - > include/configs/WUH405.h | 1 - > include/configs/csb272.h | 1 - > include/configs/csb472.h | 1 - > include/configs/gdppc440etx.h | 194 ++++++++++++++++++++ > include/configs/sbc405.h | 1 - > 34 files changed, 886 insertions(+), 29 deletions(-) > create mode 100644 board/gdsys/gdppc440etx/Makefile > create mode 100644 board/gdsys/gdppc440etx/config.mk > create mode 100644 board/gdsys/gdppc440etx/gdppc440etx.c > create mode 100644 board/gdsys/gdppc440etx/init.S > create mode 100644 board/gdsys/gdppc440etx/u-boot.lds > create mode 100644 include/configs/gdppc440etx.h
Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de To understand a program you must become both the machine and the program. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
