Loren A. Linden Levy wrote: > Hi All, > > Is there something like ethtool in U-boot that I can use to see what > the network negotiated too. This is a fairly cheap netgear switch so I > do not have any diagnostics on it. > > I will also have a look with wireshark when i get back to the lab to > see if I can identify what is happening. > > Alex > I don't have the 802.3 spec in front of me, but IIRC there are a standard set of registers for autonegotiation status that display things like your PHY's capabilities, as well as those of its peer.
As others have pointed out, you can use the MII commands to do all sorts of things, such as running an AN cycle and looking at the results, and also turning off AN and forcing speed/duplex values. I've had bad luck with cheap switches sometimes too, but ultimately this stuff is deterministic and there's a chance you can make our drivers more robust. regards, Ben _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
