Alex Perez wrote: > Hi Wolfgang, > > On Jan 4, 2009, at 12:28 AM, Wolfgang Denk wrote:
[snip] > I realize this. The board itself is quite well built, and in all > likelihood, it has some sort of integrated ROM monitor. The serial > ports are strangely on RJ11 connectors, and I don't know what their > pinouts are. I have a call in to Wind River systems, but >> Without documentation these boards are only usable as doorstops. I have a EST/SBC8260 board (also made by EST before they were bought by WR, many years ago) that also uses RJ-11s for serial I/O. Odds are good they have the same pinout: 1 MAX-232 Rin 2 MAX-232 Tout 3 n/c 4 Ground If you ohm-out the pins to find ground and then use a scope as you power on the board to look at the pins to find Tx, you have most of the puzzle solved. [snip] > Regards, > Alex Nothing like a Quixote quest. :-) gvb _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
