This patch series adds Mentor Graphics USB OTG host controller driver support and MSC support for DM6446 (TI DaVinci) platform.
- [PATCH v3 1/5] usb : musb : Adding host controller driver for Mentor USB controller. - [PATCH v3 2/5] usb : musb : Adding USB VBUS enable functionality for DM6446 DVEVM. - [PATCH v3 3/5] usb : musb : Adding DM6446 (TI DaVinci) platform specific USB support. - [PATCH v3 4/5] usb : musb : Enabling DM6446 (TI DaVinci) USB module power. - [PATCH v3 5/5] usb : musb : Enabling USB MSC support for DM6446 (TI DaVinci) platform. Note: This patch series depends on the following patch submitted by Michael Trimarchi. - [U-Boot] [USB PATCH] USB change speed Changes since v2: - Addressed changes suggested by Dirk Behme - Added register overlay structure to access mentor USB module registers Changes since v1: - Rebased to U-Boot USB next branch - Removed high element from usb_device structure _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
